Introduction For The 3000 Series Electronic Retail Dispensers - Bennett 3000 Series Operator's Manual

GoPump-R 3k Electronic Dispensers Specification Sheet
Standard Features
•
Simple electronic computer
•
Stand-alone or Interfaced to Control Device
•
RS485 interface or current loop or dual pulse
output
•
TM
Exclusive eCal (Electronic Calibration)
•
Magnet activated totals display
•
Programmable unit of measure for US gal-
lons, liters, or imperial gallons
•
Operates from 115/230Vac, 60/50Hz, or 380
Vac, 50Hz
•
Self contained (suction) models feature stan-
dard 1-HP continuous duty motor(s)
•
Back lit LCD displays
•
Satellite Outlet Connection (except Quad)
•
Self-contained (suction) models: single,
1-product twin, or 2-product twin
•
Remote models: single, 1-product twin, or
2-product twin
•
Quad "Active-4 hose" remote or suction
Construction
•
Low Hose Cabinet Design or
•
High Hose Cabinet Design
•
Front or side mount nozzle boots
•
Long-life cabinet construction using gal-
vaneal components and powder coated pan-
els
•
Black end panels & top
•
Black dial face covers
•
Red lower doors (optional colors available)
•
Hinged swing out lower door
•
Hinged swing down upper door
•
Heavy duty hose hook for C-series (optional
internal spring rewind retractor available)
Computer
•
Simple single board design electronics.
Includes CPU, power, display, eCal, RS485
or current loop connection, electromechanical
analog totalizer, push-button programming
switches, wiring terminal strip
•
LED Backlighting board for the LCD display
•
Optical pulser
•
Designed for temperature extremes—no
heaters or cooling fans required
•
Long life, highly visible back lit LCD display,
1" (2.54cm) numerals for money & volume;
1/2" (1.27cm) numerals for price-per-volume
•
Battery Backup for last sale recall during
power outage (required for resale of fuel)
•
Simple 2-command protocol via RS485 inter-
face to fleet management systems supplies
pump status, pulses, volume sale & volume
totals
•
Current loop Bennett fuel protocol interface
Bennett Commercial Pump Company & Bennett Pump Company ~ 1218 E. Pontaluna Rd. ~ Spring Lake, Mi, USA 49456 ~
tel: 231-798-1310 ~ USA Bid & Spec Desk 800-235-7618 ~ fax: 231-799-6202 ~ sales@bennettpump.com ~ www.bennettpump.com ~
www.bennettusa.com
3000 Series Retail Operators Manual 108796 Rev C, 07/05
4
Retail, money & volume display
Computer (cont'd)
•
Field wiring goes directly to terminal strip on
Computer (for new installations pull 72" of
wire above grade level)
•
Transaction display of: 999.999 for gallons,
9999.99 for liters and 6-digits for money with
programmable decimal point
•
Electronic hose totals of:
•
99999999.999 for gallons (8.3)
•
999999999.99 for liters (9.2)
•
Built-in diagnostics with error codes
Hydraulics
•
Precision Bennett SB100 Meter, 4-piston,
positive displacement design
•
Type 75 or type 75-HD Bennett sliding vane
pumping unit with integral vortex air elimina-
tor
•
SB100 meter is electronically calibrated
(eCal). Mechanically calibrated meter is
optional.
•
All remote units include built-in inlet check
valves to keep the hydraulics full and prevent
meter/pulser count-up when the submersible
pump pressurizes the system
•
Remote units use replaceable paper filter
•
Suction pumps use a reusable strainer
•
All units feature 1" hose outlets with a 1"x3/4"
reducer bushing
•
1-1/2" ground joint union inlet
Options
•
Programmable Dual Pulse Output Board to
interface to fleet management systems &
tank monitoring system if RS485 is not used
•
2-Stage prepay/preset electric solenoid valve
for 1-product, 1-hose or 2-product, 2-hose
suction pumps. (valve is standard on all other
models)
•
Internal spin-on filter & adapter for remote
models
•
For high hose models: balance vapor coax
hose outlet & internal vapor return piping
•
Healy active vapor system for high hose
•
Subpump relay 3-phase contactor
•
Intercom speaker for high hose models
•
Brushed stainless steel lower doors
•
Brushed stainless end panels
•
Custom lower door colors and/or graphics
•
Mechanical calibration dial for SB100 meter
•
Hose clamp for 5/8", 3/4", or 1" I.D. hose
•
Explosion proof junction box for lower hy-
draulic area
•
380 Volt 3-Phase Motors
•
Pressure regulating valve for suction pumps
with aboveground tank installation
•
E85 alcohol blend compatibility option
Options (continued)
•
Explosion proof junction box for lower
hydraulic area
•
380 Volt 3-Phase Motors
•
Pressure regulating valve for suction
pumps with aboveground tank instal-
lation
•
E85 alcohol blend compatibility op-
tion
•
Internal hose retractor
•
Strainer in lieu of filter w/ or w/o cloth
sack
•
Hoses, nozzles, swivels
•
Satellites (requires satellite board in
master)
For information on flow rates, motor
sizes, and model configurations see
our Model Configuration Chart &
Specification Sheet
TM
UL listed
Certified for resale applications. The
N.T.E.P. Certificate of Conformance is
available upon request
Units have been tested and found to
comply with the limits for a Class A
computing device in accordance with
Subpart J of Part 15 of FCC Rules re-
garding radio frequency interference.
Specifications in this document are
subject to change without notice.
GoPump-R 3k Marketing Specs Rev 2—102604