How To Read The Electro-Mechanical Totalizer; Displaying Electronic Totals - Bennett 3000 Series Operator's Manual

How to Read the Electro-mechanical Totalizer

The dispenser is equipped with a Electro-mechanical totalizer for each hose which records
the volume dispensed for each sale. The volume recorded is an accumulative total that can-
not be reset. The electro-mechanical totalizers are located at the top of the main display
aligned above each Individual Price Per Volume Display. The total is cumulative and reads
in whole unit (gallon or liter) increments. See Figure 3.
Note: Because of rounding methods used and the nature of electronic totals versus an ana-
log device such as an electro-mechanical totalizer, electronic totals and electro-mechanical
totals will rarely match exactly.
Displaying Electronic Totals - To display electronic totals on the 3000 series retail dis-
penser you will access menu code 1 OR view the totals through the audit trail.
Method 1 -Using a magnet, place the magnet on the right edge below the (Money / Vol-
ume) display window as shown in Figure 2. . (Magnet shipped with each dispenser Ben-
nett p/n 108952). The magnet activates the electronic totals display and the Audit Trail.
The magnet activates a switch on the CPU and the money and volume totals will be dis-
played along with an audit report for 30 seconds. The magnet can be removed after the
switch is activated. See Figures 2 & 3.
Method 2 - Accessing menu code 1 - See the next page for details.
Note -
* The nozzle lever should be in the "Off" position while accessing electronic totals.
How to read the Electronic Totals - See Figure 2,3, and 4. When a magnet is used to dis-
play the electronic totals, the first total displayed will be "Money" totals. The top row
shows the 6 most significant digits and the lower row shows the least most significant dig-
its. This example shows a total of $666,666,667.87.
After displaying the money total for 10 seconds, the display shows "Volume" totals . This
example shows 66,666,667.872 gallons. After 10 seconds, the display returns to normal.
3000 Series Retail Operators Manual 108796 Rev C, 07/05
13
Fig. 1 - Mechanical Totalizer
Fig. 2 - Using a magnet to display
electronic totals.
Fig. 3 - Electronic totals show Money
first (only 2 digits to the right of the
decimal).
Fig. 4 - Electronic totals show
money first and volume second.