Audit Form - Bennett 3000 Series Operator's Manual

Bennett Pump Company
1218 E. Pontaluna Road
Spring Lake, MI 49456
Model of Dispensers and Serial Numbers
___________________________________
___________________________________
___________________________________
___________________________________
___________________________________
___________________________________
___________________________________
___________________________________
Dispenser mode being used - Stand Alone ______ Console ________
Type of Interface Box being used if dispensers are in Console Mode?
Yes No
If connected to a console, is the maximum distance between the dispensers and the Inter
face Box less than 500 feet?
Are the field wires in metal conduit only?
Does each dispenser have a dedicated conduit?
Are the dispenser field wires Oil and Gas resistant, color coded, THHN, copper stranded?
Are the dispenser field wires continuous with no splices?
Is the resistance measurement between Ground and Neutral at the dispenser less than 1
ohm? Attach photo(s) (if possible) showing this measurement.
Are there no more than 2 dispensers on one breaker (maximum)?
Are the dispensers on dedicated breakers and NOT sharing power with any other equip
ment (sub pumps, motors, air– conditioners etc.)?
Do the supply tanks have fuel?
If it is a suction system, are all suction components installed per Bennett specifications?
If connected to a console, are the Interface boxes within 100 feet of the Point of Sale?
Is the vapor seal on the field wires in dispenser head installed?
Is the dispenser mechanically mounted to the island using securing bolts and shimmed for
squareness?
Is there an emergency cutoff shear valve mounted on each product inlet on remote dis-
pensers?
Is/are there satellite dispensers installed?
Are all dispensers on the same phase of power?
If this is a retail application, is there an emergency stop relay installed and working prop
erly for the fuel court area?
If this is a remote unit, are there RC Networks on the sub pump relays?
Have the meter calibrations been verified?
Was the Bennett Warranty statement reviewed with the station Manager / Owner?
Name of Owner / Manager? _________________________________________
Were all Bennett installation instructions in the Installation Manual followed? (If not, please
list on the next page).
Bennett Pump Company
This form must be filled out and sent
in to Bennett to establish the equip-
3000 Series Electronic Dispensers.
__
Checklist
3000 Series Retail Operators Manual 108796 Rev C, 07/05
43
Site Audit Report
ment warranty.
Site Information:
Site Phone Number ______________________
Site Name _____________________________
Site Address ____________________________
____________________________
City ________________ State _____ Zip _____
Owned by _____________________________
Equipment Purchase Date __________________
Equipment Installation Date _________________
Date of Audit
Date of Installation
______________
Mechanical Interface _____