Menu Code 8 - How To Set Decimal Point Location - Bennett 3000 Series Operator's Manual

Menu Code 8 - How to Change the Decimal Point Locations for Other Than
U.S. Standard
The dispenser is shipped from the factory set for the monetary system in the United States.
NOTE: IF THE DISPENSER IS TO BE OPERATED IN U.S. DOLLARS, DO NOT ENTER
THIS MENU CODE.
The decimal in the money display and the price per volume display can be changed. The volume
display (gallons, liters, or British Imperial gallons) cannot be changed in this menu.
To change the decimal placement, follow this procedure:
1. After the Manager's Mode has been accessed, press the 8 button and then the MODE button on
the keypad. See Figure 1. The United States standard decimal placement appears in the main
display and PPV display. The number 0.00 appears in the main display to show the dispenser is
set for U.S. Standard. See Figure 2.
There are seven decimal selections available.
DECIMAL PLACEMENT SELECTIONS
MONEY
DISPLAY
Selection Money
0 [ 1.23]
1 [ 1.23]
2 [ 1.2]
3 [ 1.2]
4 [ 12]
5 [ 123]
6 [ 1.23]
To select a new decimal placement value, follow this procedure:
1. Use the 0 through 6 buttons on the keypad to enter a new selection. The display will show the
option number as well as the decimal placements in the money and PPV displays . See Figure
3.
2. Press the ENTER button. The new decimal placement appears in the displays.
3. If an error is made, repeat steps 1 and 2 until the correct decimal placement selection appears.
4. Press the CANCEL button to exit this menu code.
5. Exit the Manager Mode to make sure that the decimal points are located in the proper loca
tions in the money, volume and price windows. See Figure 4.
3000 Series Retail Operators Manual 108796 Rev C, 07/05
VOLUME PPV
DISPLAY DISPLAY
Volume
Gallons / Liters Price
[1.234] [ 1.23] [1.234]
[1.234] [ 1.23] [12.34]
[1.234] [ 1.23] [12.34]
[1.234] [ 1.23] [123.4]
[1.234] [ 1.23] [123.4]
[1.234] [ 1.23] [1234 ]
[1.234] [ 1.23] [123.4]
22
Fig. 1
Fig. 2
Fig. 3
Fig. 4