Kedacom IPC4X2 Series User Manual page 98

Laser Thermal Optical PTZ Camera
3) Configure scheduled snapshot:
Select "Enable" enable scheduled snapshot;
a)
Snapshot Type: select "According to the time" or "According to the number";
b)
c)
Time Interval: select the interval between snapshots;
d)
Configure durations for scheduled recording. The default setting is 24 hours in bright
blue bar, or you can customize the durations;

Set duration: configure arming durations according to actual requirements.




Copy duration: click the copy icon
the day to one or several other days.
Picture 7-4 Scheduled snapshot
Click the blue bar to pop up a window for editing the accurate start time and
end time; click "Save" to validate setting.
Click any duration and there will be small white squares on the 2 ends of it. Put
the mouse on any whit square, left-click and drag the edit the start time and end
time.
Select the timeline of any day and delete the default blue bar. Left click on the
mouse and drag on the timeline from left to right to form a blue bar, above
which it shows the start time and end time.
behind the timeline and copy the durations on
94
User Manual