Exit Guard Area - Kedacom IPC4X2 Series User Manual

HD Mini Dome Camera
6.1.5

Exit Guard Area

The function is to detect if there is anything leaving the set guard area, and the camera
will judge if it is necessary to trigger an alarm. Configuration steps are as follows:
1)
2)
3)
4)
Go to Settings > Event > Intelligent Function > Exit Guard Area;
Select "Enable";
Adjust the surveillance scene through the PTZ;
Select a number from the dropdown list of Guard Area and user can set only one
area at one time. After saving it, user can set another and max 4 guard areas can be
set;
Picture 6-10 Exit guard area
69
User Manual