Qos - Kedacom IPC4X2 Series User Manual

HD Mini Dome Camera
3)
4)
4.3.5 802.1X
802.1X is a port based network access control protocol. User can select "Protocol Type"
manually to control if the device connected to the LAN can access to the LAN, which will
support the requirements of network authentication, charging, safety and management
well. Configuration steps are as follows:
1)
2)
3)
4)
5)
6)
4.3.6

QoS

QoS stands for Quality of Service, which can solve the problem of network delay and
network congestion efficiently. Configuration steps are as follows:
1)
2)
Configure "CPU Utilization Threshold", "Memory Utilization Threshold" and "Packet
Loss Rate Threshold". The default values are all 100, ranging 1 ~ 100;
Click "Save" to validate setting.
Go to Settings > Network > Other Protocols > 802.1X;
Select "Enable" to enable IEEE 802.1X protocol;
Select "Protocol Type" from the dropdown list and the default is "EAP-MD5".
Select version from the list of "EAPOL Version";
Input user name and password;
Click "Save" to validate setting.
Note: QoS function needs the support from network transmission device such as a
router or a switch.
Go to Settings > Network > Other Protocols > QoS, and it is enabled by default
and non-editable;
Configure "DSCP for Audio/Video" and "DSCP Management", ranging 0 ~ 63;
Picture 4-12 802.1X
Picture 4-13 QoS
31
User Manual