Startup; Activate Camera - Kedacom IPC4X2 Series User Manual

HD Mini Dome Camera

2. Startup

Note: User should be responsible for all risks of accessing the camera to the Internet, including but not limited
to possible cyber-attack, hacking attack, virus infection and etc. This company is not responsible for
product failures and information disclosure caused thereby, but will provide timely technical support for
the camera.
For device installation and wiring, please refer to the Quick Start Guide.
After the camera is installed, configure parameters and functions through the web client. Please ensure the
mutual network communication between the camera and the PC before configuring.
Requirements of PC for installing the client:

Processor: 3.3 GHz Intel CORE®i3 series and later version or other equivalent processors

RAM Memory: 4GB or above

Operating System: Windows 7 or higher versions

Browser: Suggest using IE Kernel browser, otherwise it will affect some functions of the client

DirectX：9.0c

2.1 Activate Camera

When the camera is first used, user should activate it and set the login password for normal use.
There are 2 methods to activate the camera: though IPCSearch or through browser.

Activate through IPCSearch
1) Download IPCSearch from our website (address: https://www.kedacom.com/cn/softtools/index.jhtml),
and install it according to the prompts.
2) After finishing installation, run IPCsearch and the system will search the cameras in LAN and display
the list as shown below.
Note: Camera name is subject to the search result.
Select the camera to be activated, right click and select "Activate". On the popup interface, configure
3)
admin user password and email for claiming password. Click "Activate" to activate the device.
Picture 2-1 IPCSearch
4
User Manual