Onvif - Kedacom IPC4X2 Series User Manual

HD Mini Dome Camera
1)
2)
3)
4)
5)
6)
7)
4.2.2

ONVIF

The client supports adding device to the back-end platform through ONVIF protocol,
which enables different network video products such as cameras and recorders from
different manufacturers to communicate with each other. Configuration steps are as
follows:
1)
Go to Settings > Network > Access Protocol > VSIP;
Input VMS IP address or domain name in "VMS Address";
Input "VMS Port Number", 5510 by default;
Input "Camera UUID" and "Camera Password". Camera UUID is distributed by
back-end platform and the password needs no edition as it requires no verification;
When the camera is in NAT and needs cross-segment access to VMS, select "Send
NAT Probe Packets";
Select "Auto Networking" to enable auto networking. When NVR adds devices
automatically, the camera will be added automatically;
Click "Save" to validate setting.
Note:

Please refer to the User Manual for PMC Client for adding cameras to the VMS;

VSIP protocol only supports registering to VMS of this company or other
SDK-integrated back-end platforms.
Go to Settings > Network > Access Protocol > ONVIF;
Picture 4-4 VSIP
25
User Manual