Kedacom IPC427-D120-N User Manual
  1. Manuals
  2. Brands
  3. Kedacom Manuals
  4. Security Camera
  5. IPC427-D120-N
  6. User manual

Kedacom IPC427-D120-N User Manual

Hd ir dome camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
KEDACOM
User Manual for HD IR Dome Camera
Version 03 (July, 2017)

Advertisement

Table of Contents
loading

Related Manuals for Kedacom IPC427-D120-N

Summary of Contents for Kedacom IPC427-D120-N

  • Page 1 KEDACOM User Manual for HD IR Dome Camera Version 03 (July, 2017)

  • Page 2: 2017 Suzhou Keda Technology Co., Ltd. All Rights Reserved

    Trademark Kedacom™ and are trademarks of Suzhou Keda Technology Co., Ltd. in China and various other countries. All other trademarks mentioned in this document are the property of their respective holders. Suzhou Keda Technology Co., Ltd. 131 Jinshan Road New District, Suzhou, 215011 People's Republic of China http://www.kedacom.com/en...

  • Page 3: Target Audience

    Target Audience Administrators and Operators of Video Surveillance Products Document Version Version 03 Applicable Models IPC427-D120-N, IPC427-D020-N Related Document Quick Start Guide Convention Icon Convention Notices and warning: necessary supplement of operations Sign Convention Menu, e.g. Drag to Zoom Connector between menus of >...
  • Page 4 connecting rod on the bracket, make sure there is no hole on the rod to avoid water. 8. Outdoor Dome Camera must be completely sealed to avoid dampness. Make sure there is no hole on the connecting rod of bracket to avoid water. 9.

  • Page 5: Table Of Contents

    HD IR Dome Camera User Manual Contents © 2017 Suzhou Keda Technology Co., Ltd. All rights reserved..............i Notice ................................. i Target Audience ............................... ii Product Brief ............................3 Product Appearance ..........................4 Startup..............................5 Client Installation Conditions ......................5 Initial Configuration ..........................
  • Page 6 HD IR Dome Camera User Manual Settings ..............................43 Network Access ..........................43 5.1.1 Ethernet ........................... 43 5.1.2 PPPoE ............................. 43 Register to VMS ..........................44 User Security ..........................45 5.3.1 User Management ........................45 5.3.2 IP Filter ............................ 46 5.3.3 Security Service ........................

  • Page 7: Product Brief

    HD IR Dome Camera User Manual 1. Product Brief High Speed Dome Camera (hereinafter referred to as Camera) is remote HD IP Camera based on IP network technology. It encodes and transmits HD video. Also, it can be deployed at any point of a surveillance network and transmits videos via public or private IP network.

  • Page 8: Product Appearance

    HD IR Dome Camera User Manual 2. Product Appearance Picture 2-1 IR Dome Camera...

  • Page 9: Startup

    HD IR Dome Camera User Manual 3. Startup Device installation and wiring can be referred to in the Quick Start Guide. 3.1 Client Installation Conditions  Operating System: Windows XP or newer versions  Browser: IE7.0 or later versions, Firefox, Google Chrome (41 and below versions) ...

  • Page 10: Login Web Client

    HD IR Dome Camera User Manual Select a camera to be configured, click “Modify Params” or right click the mouse. Interface is shown in Picture 3-3. Modify parameters and fill admin user name (admin) and the password set when activating the device.

  • Page 11: Password Reset

    HD IR Dome Camera User Manual Picture 3-5 Web Client Login Notice: If log in the non-activated device through web client for the first time, user can set admin password and activate the device in the login interface, as shown below. Notice: To ensure the safety of device on internet, it is strongly recommended that you set a strong password which is composed of at least 2 kinds of the following, digits, case-sensitive letters or specific symbols,...

  • Page 12: Login To The Web Client Interface

    HD IR Dome Camera User Manual Picture 3-7 Password Reset Enter Restore Password interface and paste the Serial Number. Fill in Email address and enter the Verification Code. Click “Get Security Code”. Picture 3-8 Password Reset Login to the email address to get a code and fill in “Command” in Picture 3-7 and click “OK”. A window pops up and indicates the new password (admin123).
  • Page 13 HD IR Dome Camera User Manual Picture 3-9 Web Client Interface...

  • Page 14: Product Functions

    HD IR Dome Camera User Manual 4. Product Functions By web client, user can not only view live video, but also perform local snapshot and recording, and set alarm linkage. Notice: Disabled button in the web client means the model doesn’t support the function. Function with * in this Manual means only some models support this function.
  • Page 15 HD IR Dome Camera User Manual Picture 4-2 Snapshot and recording setting EPTZ Click this button to enable the e-PTZ function. Left click and drag toward lower right to draw an area. The pixels of this area will be amplified and will cover the whole screen. Left click and drag toward upper left to draw an area, then image will recover.

  • Page 16: Image Adjustment

    HD IR Dome Camera User Manual 4.1.2 Image Adjustment 4.1.2.1 Focus The function of focusing is to make image clear. In the interface of Live View, click (Focus Near), (Focus Far) or (Auto Focus). Alternatively, go to Settings > Camera > Image > Focus, and select “Manual” for Focus Mode. Go to Settings >...
  • Page 17 HD IR Dome Camera User Manual Notice: However, the higher the gain is, the more noise points there will be and the worse the image will be. Auto mode is suggested. Apply default values, or select “Auto” and set Gain Upper Threshold in Settings > Camera > Image >...
  • Page 18 HD IR Dome Camera User Manual Select Night from the dropdown list of Night Cut mode and enable IR lamp (only some models support), and the image will become black and white. Auto Select Auto (gain triggered) or Auto (photosensor triggered) from the dropdown list of Night Cut mode and configure Sensitivity / Photosensitivity, Latency and Night Cut Threshold.

  • Page 19: Auxiliary Function

    HD IR Dome Camera User Manual Picture 4-3 Rotate and BNC 4.1.3 Auxiliary Function *Wiper Wiper is used to clean the glass dome. In the PTZ control part of the Live View interface, Click enable wiper and click again to disable it. The wiper will stop automatically after 10 brushes.

  • Page 20: Basic Configuration

    HD IR Dome Camera User Manual Picture 4-4 PTZ Control Form 4-1 Buttons on PTZ Control Panel Button Explanation Click the 8 direction buttons to control the pan and tilt rotation of the PTZ; Click and the camera will patrol in pan; click again to stop; Drag the slide bar to adjust camera rotation step length.

  • Page 21: Guard Tour

    HD IR Dome Camera User Manual Preset point speed level: the speed to load preset position, the larger the value is, the faster the speed is; otherwise, the speed is slower. Zoom Speed Level: the speed level of focusing, the larger the value is, the faster the speed is. Enable Auto PT Speed: check this option and the auto PT speed function will be enabled, i.e.

  • Page 22: Preset Position

    HD IR Dome Camera User Manual Pan Mode: Camera rotates in pan direction from 0° to 360° automatically. The Waiting Time is 1 minute by default (configurable). Tilt Mode: Camera patrols vertically from -15° to 90° automatically within its limits. The Waiting Time is 1 minute by default (configurable).

  • Page 23: Restricted Patrol

    HD IR Dome Camera User Manual Picture 4-7 Preset linked to intelligent function Click “Set” to finish preset setting. User can define different preset positions. Click “Load” to load the expected Preset No. and click “Delete” to remove the preset ID. In the preset part of the Live View interface, user can also select a preset ID to load, set or clear.

  • Page 24: Path Mode

    HD IR Dome Camera User Manual 2) Check “Manually Restricted Patrol” or “Auto Restricted Patrol”, adjust the PTZ to a proper position and set it as the Left Restriction. Adjust the PTZ again to another position and set it as the Right Restriction. 3) Settings take effect right after configuration.

  • Page 25: Scheduled Task

    HD IR Dome Camera User Manual Picture 4-11 Mixed mode Setting steps: Go to Settings > Camera > PTZ > Mixed Mode. Select Mixed Mode from the dropdown list. Click “Start Recording” and adjust PTZ, then it will record PTZ rotation speed, increment and zooming operations. Click “Stop Recording” to stop recording. Each path can record for at most 10 minutes.

  • Page 26: Positioning

    HD IR Dome Camera User Manual “Delete” in Picture 4-13 or to cancel scheduled task. Click to cancel all the scheduled tasks in one week. Picture 4-13 Edit duration Picture 4-14 Copy 4.2.8 Positioning Go to Settings > Camera > PTZ > Positioning. Zero Correction When the PTZ goes out of step or rotates abnormally, zero correction is necessary.
  • Page 27 HD IR Dome Camera User Manual *Azimuth Positioning Azimuth means the PTZ camera faces to the due north. If azimuth positioning is done, when user enables “PTZ” OSD, it will show the live direction of the PTZ camera. Go to Settings > Camera > PTZ > Basic Config to select PTZ position display format: display according to azimuth angle or PT position.

  • Page 28: Alarm Linkage

    HD IR Dome Camera User Manual Picture 4-17 Azimuth Positioning- according to azimuth angle Picture 4-18 Azimuth Positioning- according to PT position 4.3 Alarm Linkage Alarm linkage is the system reaction after an alarm signal is received. It is to raise watch man’s attention to handle the event.

  • Page 29: Motion Detection

    HD IR Dome Camera User Manual The alarm signal comes from the alarms triggered in the set surveillance areas such as motion detection and tampering or alarm input devices such as smoke detector. Alarm linkage reaction includes Alarm Text Overlay, Snapshot or triggering alarm output device (such as alarm bell).
  • Page 30 HD IR Dome Camera User Manual Picture 4-20 Motion Detection Motion detection supports full area detection and max 4 user-defined areas. The default is full area detection. Go to Settings > Event > Intelligent Function > Motion Detection, and check “Enable”. Click “Clear All”...

  • Page 31: Tampering

    HD IR Dome Camera User Manual Set arming duration: the default duration is 24 hours displaying in blue, or user can define durations up to request.  Click any free point on the timeline and drag mouse rightward to make a blue bar as task duration for that day.

  • Page 32: Guard Line

    HD IR Dome Camera User Manual Picture 4-22 Tampering 4.3.3 Guard Line Enable this function in the interface to detect specific area at real time. Once any object enters the guard line, an alarm will be triggered. Go to Settings > Event > Intelligent Function > Guard Line and configure.
  • Page 33 HD IR Dome Camera User Manual Picture 4-23 Guard Line Setting steps: Check “Enable”; If the intelligent function has linked to a preset, it displays “Already Set” behind “Enable Presets”. On this interface, user can edit or delete the set linkage;...

  • Page 34: Enter Guard Area

    HD IR Dome Camera User Manual Behind “Programme”, there are 32 numbers for selection. Select the saved set number and select a number from the dropdown list of “Associated preset bits” to link to the preset; Select a direction from the dropdown list of Guard Line Direction, “A”, “B” or “A&&B”. Take “A” as an example, when selecting this direction, only when objects move from A to B the system will detect it and trigger an alarm;...

  • Page 35: Exit Guard Area

    HD IR Dome Camera User Manual Picture 4-24 Enter guard area 4.3.5 Exit Guard Area Enable this function in the interface to detect specific area at real time. Once any moving object leaves the area, an alarm will be triggered. Go to Settings >...

  • Page 36: Object Left

    HD IR Dome Camera User Manual 4.3.6 Object Left Enable this function in the interface to detect specific area at real time. When any object is left in the area, an alarm will be triggered. Go to Settings > Event > Intelligent Function > Object Left and configure. Setting steps can be referred to in Enter Guard Area.

  • Page 37: Abnormality Linkage

    HD IR Dome Camera User Manual Check “Linkage Method”. Click “Save”. Picture 4-25 Alarm input 4.3.11 Abnormality Linkage Abnormality linkage means the linkage triggered when abnormality occurs. Abnormality type includes Disk Full, Disk Error and Internet Disconnected. Setting steps: Go to Settings > Event > Abnormality Linkage, and check “Enable”. Select type from the dropdown list of Abnormality Type.

  • Page 38: Video Parameters

    HD IR Dome Camera User Manual Picture 4-26 Abnormality linkage Notice: Abnormalities of disk full and disk error are prompted in live view window in the format of icons, which display in the same line of system time. 4.4 Video Parameters 4.4.1 Video Encoding Camera supports multiple streams encoding and decoding.

  • Page 39: Privacy Mask

    HD IR Dome Camera User Manual Picture 4-28 ROI Setting steps for ROI: Go to Settings > Camera > Video > ROI, and check “Enable”. Click “Edit”, and drag a rectangle area with mouse as the specific area. Click “Clear” to cancel setting and reset.

  • Page 40: Snapshot

    HD IR Dome Camera User Manual Check GPS and camera coordinates will be displayed. Lens Direction Check Lens Direction and the lens direction will be displayed. Basic Intelligent Feature After configuring basic intelligent info (e.g. In the interface of Settings > Event > Intelligent Function > Guard Line, check and configure guard line function) and checking "Basic Intelligent Feature"...

  • Page 41: Management

    HD IR Dome Camera User Manual Picture 4-31 Configure recording 4.6.2 Management Go to Settings > Local Setting > Local Setting to configure Packet Size of video recording and set save path for video clipping and video download, as shown in Picture 4-2. Go to Settings >...

  • Page 42: Download

    HD IR Dome Camera User Manual Select recording time. Select a date from the calendar. If there is background color on a date, it means there is recording on that day. Click “Search” and the timeline will show durations with video recordings. Click to playback the recording from beginning.

  • Page 43: Clipping

    HD IR Dome Camera User Manual Picture 4-34 Download video recording 4.6.5 Clipping Enter video playback interface and clip (make sure an SD card has been rightly inserted) video recording from SD card. Clipping save path can be configured in Settings > Local Setting > Local Setting, as shown in Picture 4-2.

  • Page 44: Web Client Upgrade

    HD IR Dome Camera User Manual Picture 4-35 Firmware Upgrade Click “Upgrade” and open local upgrade file (<*.pkg> format). During upgrading, please do nothing but waiting. After upgrading, if it is necessary to upgrade the web client, the system will prompt to download the plug-in.

  • Page 45: Restoration

    HD IR Dome Camera User Manual Picture 4-36 Download Plug-in Method 2 After firmware upgrade, please re-login web client. The page will prompt to download a new plug-in control. After downloading, the upgrade is completed. Re-login to enter the latest web client. Notice: For detailed operations on the web client, please refer to the “Help”...
  • Page 46 HD IR Dome Camera User Manual Picture 4-37 Restoration...

  • Page 47: Settings

    HD IR Dome Camera User Manual 5. Settings Some models may not support some of the functions stated below. User operation is subject to the actual models and clients. 5.1 Network Access The Initial Configuration part has introduced how to modify parameters via IPCSearch to make camera access to network.

  • Page 48: Register To Vms

    HD IR Dome Camera User Manual 5.2 Register to VMS The camera can be registered to surveillance VMS through VSIP protocol. After the camera is rebooted, user can view camera live video at the client of VMS. This part will take VMS V2.0 as an example to introduce the registration steps.

  • Page 49: User Security

    HD IR Dome Camera User Manual Picture 5-5 VSIP- Registration successful 5.3 User Security 5.3.1 User Management Go to Settings > System > User Security > User. Add: Click “Add”, and enter “User Name” and “Password” in the popup interface. Select user type from the dropdown list of “User Type”, and assign operation authority to newly added user from the “Authorization List”.

  • Page 50: Ip Filter

    HD IR Dome Camera User Manual Please modify the password periodically and once every 3 months is recommended. If the device is used in highly risky environment, suggest modifying the password monthly or weekly. Please keep your user name and password safe. Delete: Select user IP and click “Delete”...
  • Page 51 HD IR Dome Camera User Manual Picture 5-8 OSD Check the options in “Content” and preview the result in the window below. For example, if user checks “Time”, time will be displayed in the window. Load font: Click “Load” to load “Default Font” or other fonts. Then edit content and position according to the above steps.
  • Page 52 HD IR Dome Camera User Manual Click “Save” to save OSD setting. The OSD will display in the set format. If user selects Magnification, the text will show in the magnified times. Picture 5-10 Magnification...

  • Page 53: Appendix: Glossary Of Terms

    6. Appendix: Glossary of Terms 1080p Resolution of 1920*1080 pixels (16:9) 720p Resolution of 1280*720 pixels (16:9) QXGA Resolution of 2048*1536 pixels (4:3) UXGA Resolution of 1600*1200 pixels (4:3） Resolution of 352*288 pixels QCIF Resolution of 176*144 pixels High-definition Network Address Translation DHCP Dynamic Host Configuration Protocol DDNS...

This manual is also suitable for:

Ipc427-d020-n

Table of Contents