Ip Filter; Security Service - Kedacom IPC4X2 Series User Manual

Laser Thermal Optical PTZ Camera
8.2.3

IP Filter

By setting IP filter, user can manage access limitation to the web client.
Configuration steps are as follows:
1)
2)
3)
4)
8.2.4

Security Service

Go to Settings > System > User Security > Security Service, and configure the
parameters to protect user safety.
Go to Settings > System > User Security > IP Filter;
Select IP filter from the dropdown list up to request, options including "Disable",
"Black List" and "White List";

Disable: IP filter is disabled.

White List: IP list allowed visiting the device.

Black List: IP list not allowed visiting the device.
Configure IP address list;
 Add Black/ White List: Select filter method, click "Add" and input IP
address on the popup interface, and click "Confirm".

Modify Black/ White List: Select IP address from the black/ white list and
click "Modify" to modify the IP address, and click "Confirm".

Delete Black/ White List: Select IP address from the black/ white list and
click "Delete" to delete the IP address. Click "Delete All" to clear all the
added IP addresses.
Click "Save" to validate settings.
Picture 8-8 Security Service
Picture 8-7 IP Filter
99
User Manual