Recording - Kedacom IPC4X2 Series User Manual

Laser Thermal Optical PTZ Camera

Progress: show the percentage of the formatting progress of the storage card.
Select the disk and click "Formatting" to format the selected disk.

Snapshot: Configure the save path for the snapshots. According to actual requirements,
select "Local storage" (TF card in the camera) or "FTP" (server) to save the scheduled
snapshots and alarm snapshots.
Note: The storage card is
using the local storage card for the first time, please click "Formatting" first.

7.2 Recording

After configuring scheduled recording, the camera will perform different video recording tasks
automatically in the configured durations and save the videos in the storage card.
Configuration steps are shown below:
1) Go to Settings > Storage > Storage Management to configure disk full strategy and
format the storage card recognized by the camera. If formatting is successful, the Status
will turn "Normal" which means the storage card can be used normally;
2) Go to Settings > Storage > Recording to configure video recording;

Recording Type: Select the stream to be recorded. If none is selected, it will not be
able to record videos.

Code Stream Format: Select a video packaging format according to the type of
access protocol.

Prerecord: Select prerecord duration, i.e. the prerecord duration before recording
starts. It is certain to be 30s.

Recording Delay: Select recording delay time, i.e. the prolonged recording duration
after the configured duration.
installed in the camera when going out of the factory. When
91
User Manual