Kedacom IPC4X2 Series User Manual page 3

Target Audience
Administrators and Operators of Video Surveillance Products
Document Version
V2.1
Applicable Models
IPC4X2 series
Software Version
V7R3B3
Related Document
Quick Start Guide
Convention
Icon/Sign Convention
Notes and warning: necessary supplement of operations
B Menu, e.g. Drag to Zoom
OLD
"" Interface quote, e.g. "Save"
> Connector between menus of differe nt level, e.g. Settings > Camera
Safety Instruction
These instructions are intended to ensure that the user can use the product correctly to avoid danger or
property loss. Please read this Guide carefully before using the product, and keep it properly for future
reference. If the product cannot work normally or is damaged because the user does not follow the
safety instructions, we shall not assume any responsibility.
Before installation, please follow the instructions below:
Instructions
1. Please adopt power supply in the safety voltage range.
2. If the product does not work properly, please contact your dealer or the nearest service center.
Never attempt to disassemble or repair the product yourself in any way.
3. Do not drop the camera or subject it to physical shock.
4. When cleaning the lens, please use a rubber dust blower to remove dust on the lens or filter, and
use dry soft cleaning cloth to remove the dirt on camera surface. For some hard dirt, user can apply
some detergent to the cleaning cloth and wipe gently. Never apply any volatile solvent, such as
ethanol, benzene and diluents, to avoid damage to surface coating.
5. Do not focus the camera lens on strong light such as the sun or incandescent lamp. The strong light
can cause overexposure or light leak (not camera malfunction), which may shorten camera lifetime.
6. Do not expose the camera in the environment not defined in the Manual. Maintenance and fee due
to exposure of product in the wrong conditions will be user's responsibility.
ii