Configure Network Parameters - Kedacom IPC4X2 Series User Manual

HD Mini Dome Camera




2.2 Configure Network Parameters

After activating the camera, modify camera network parameters through IPCSearch, such as IP address,
subnet mask and gateway.
1) Run IPCSearch and the system will search the cameras in LAN automatically and display the result on
the list;
Select a camera whose network parameters should be modified. Click "Modify Params" or right click the
2)
mouse. Modify parameters and fill admin user name (admin) and the password set when activating the
device.
Click "OK" and the following window will pop up. Click "OK" and wait for the camera rebooting.
3)
To ensure the safety of device on internet, it is strongly recommended that you set a strong
password composed of at least 2 kinds of the following, numbers, upper-case letters, lower-case
letters or specific symbols with length of 8 to 16 characters.
Please modify the password periodically such as once every 3 months. If the device is used in
highly risky environment, suggest modifying the password monthly or weekly.
Please keep your username and password safe.
Picture 2-4 Modify Parameter
6
User Manual