Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Kedacom IPC2255-Gi4N Series
Summary of Contents for Kedacom IPC2255-Gi4N Series
- Page 1 KEDACOM User Manual for Intelligent Camera V1R1 Jan., 2018...
- Page 2 Trademark Kedacom™ and are trademarks of Suzhou Keda Technology Co., Ltd. in China and various other countries. All other trademarks mentioned in this document are the property of their respective holders. Suzhou Keda Technology Co., Ltd. 131 Jinshan Road New District, Suzhou, 215011 People's Republic of China http://www.kedacom.com/en...
- Page 3 Suzhou Keda Technology Co., Ltd. is not responsible for printing or clerical errors. Target Audience Administrators and Operators of Video Surveillance Products Document Version V1R1 Applicable Models IPC2255-Gi4N series IPC2231-Gi4N series IPC2252-Gi4N series Related Document Quick Start Guide Convention Icon...
-
Page 4: Table Of Contents
Contents Product Brief ........................... 1 Start Up ............................3 Client Installation Conditions ....................3 Initial Configuration ......................3 2.2.1 Modify Parameter ....................... 3 2.2.2 Login to Web Client ....................5 2.2.3 Password Reset ......................6 2.2.4 Login to the Web Client Interface ................8 Live View .......................... - Page 5 4.1.2 White Balance ......................31 4.1.3 Night Cut ........................31 4.1.4 Noise Reduction ....................... 32 4.1.5 *Wiper........................32 Motion Detection ........................ 35 Alarm Linkage ........................37 4.3.1 Motion Detection Alarm Linkage ................38 4.3.2 Alarm Input Linkage ....................38 4.3.3 Abnormality Linkage ....................
- Page 6 User Security........................52 5.3.1 User Management ....................52 5.3.2 IP Filter ........................53 5.3.3 Security Service ....................... 54 Text Overlay ........................55 Appendix: Glossary of Terms ...................... 57...
-
Page 7: Product Brief
Intelligent Camera User Manual Product Brief IPC2231-Gi4N-SIR40-Z7022, IPC2252-Gi4N-SIR50-Z7022 and IPC2255-Gi4N series (hereinafter referred to as intelligent camera) are remote video surveillance cameras based on IP network technology. It supports max resolution of 1920x1080, snapshot people in the scene. It captures optimum head-shoulder and whole-body pictures of every person, and analyzes their direction and speed. - Page 8 Intelligent Camera User Manual Support Beidou/ GPS dual-mode positioning (applicable to IPC2255-Gi4N only) Support WiFi probe Built-in human checkpoint intelligent analysis function Support optimum human face snapshot Support optimum whole body snapshot Support human attribute analysis, direction and speed ...
-
Page 9: Start Up
Intelligent Camera User Manual Start Up Please refer to the Quick Start Guide in the packing for device installation and wiring. 2.1 Client Installation Conditions Requirements of PC for installing the client: Operating System: Windows 7 or later versions Browser: IE8.0 and later versions, Firefox, Google Chrome (41 and below) Processor: 3.3 GHz CORE®i3 series or other equivalent processors RAM Memory: 4GB or above DirectX：9.0c... - Page 10 Intelligent Camera User Manual Picture 2-2 Batch processing Select a camera to be configured, click “Modify Params” or right click the mouse. Interface is shown in Picture 2-3. Modify parameters and fill admin user name (admin) and the password set when activating the device. Picture 2-3 Modify Parameter...
-
Page 11: Login To Web Client
Intelligent Camera User Manual Click “OK” and in the popup window click “OK”. Wait for rebooting. Picture 2-4 Reboot device 2.2.2 Login to Web Client After modification, the device will reboot automatically and please wait patiently. After reboot, the button will be enabled again. Please select this device again and click “Login” or double click device name to enter web client. -
Page 12: Password Reset
Intelligent Camera User Manual Picture 2-6 First login through web client Notice: To ensure the safety of device on internet, it is strongly recommended that you set a strong password which is composed of at least 2 kinds of the following, digits, case-sensitive letters or specific symbols, and whose length ranges from 8 to 16 bits. - Page 13 Intelligent Camera User Manual Click “Password Reset“ on IPCSearch and a window will pop up, as shown below. Click “Copy” behind Serial No. and click the password reset link or scan the QR code to enter the link. Picture 2-7 Password Reset On the interface of Restore Password, paste the Serial Number and fill in Email address.
-
Page 14: Login To The Web Client Interface
Intelligent Camera User Manual After resetting the password, re-login the web client and configure the device. To improve system safety, go to Settings > System > User Security > User, and edit password. Please refer to the part of User Management. 2.2.4 Login to the Web Client Interface Enter user name and password: when login successfully for the first time, download and... -
Page 15: Tool Bar Buttons On Main Interface
Intelligent Camera User Manual Picture 2-10 Live View Interface 2.3.1 Tool Bar Buttons on Main Interface Picture 2-11 Toolbar Buttons Play/Pause Click this button to play or pause a viewing. Stop Click this button to stop live view. Call Click this button to call camera, and click again to stop calling. Snapshot... - Page 16 Intelligent Camera User Manual Click this button to capture an image. Snapshot includes Camera Snapshot and Local Snapshot . User can set snapshot save path in Settings > Local Setting. Recording Click this button to start recording and click again to stop recording. Recording is saved on local PC.
- Page 17 Intelligent Camera User Manual Picture 2-12 Snapshot Setting ePTZ Click this button to enable the ePTZ function. Left click and drag toward lower right to draw an area. The pixels of this area will be amplified and will cover the whole screen. Left click and drag toward upper left to draw an area, then image will recover.
-
Page 18: Installation
Intelligent Camera User Manual Video Freeze Click video freeze button and the live video will not change any more; click again to recover live view. Full Screen Click this button to display full screen. Double click or press Esc to exit. 2.4 Installation 2.4.1 Outdoor Installation... - Page 19 Intelligent Camera User Manual Picture 2-13 Schematic diagram for installing outdoor 3) Select color for the horizontal line. Click Show Line and the horizontal line will show on the top of the image in the selected color. 4) Adjust the slant angle of camera housing and lens zooming to make sure that the top of human head in the image aligns to the horizontal line while his tiptoe aligns to the bottom of the image.
- Page 20 Intelligent Camera User Manual 5) Click “Open Clarity Adjust” and a red frame will display in the image, in which shows the clarity coefficient. The larger the coefficient is, the higher the clarity is. Adjust camera lens focusing and the clarity coefficient changes with it. When the coefficient comes to its max, it means the camera has reached the best focusing position.
-
Page 21: Indoor Installation
Intelligent Camera User Manual The larger the number is, the clearer the image will be Picture 2-15 Clarity Adjustment 2.4.2 Indoor Installation Go to Intelligent > Intel Config > Install Inside, and the configuration steps are as follows: 1) Click “Installation Diagram”, and a window pops up. 2) Firstly, comparing to the installation diagram, select Installation Height (options include 2m, 2.25m, 2.5m, 2.75m, 3m only) according to the actual installation environment, and the range of Horizontal Distance is in the brackets. - Page 22 Intelligent Camera User Manual Picture 2-16 Schematic diagram for installing outdoor 3) Select color for the horizontal line. Click “Show Line” and there will be 2 horizontal lines showing in the image in the selected color. 4) Adjust the slant angle of camera housing and lens zooming to make sure that the 2 lines on the pole (1.48m and 1.62m high) coincide with the 2 horizontal lines in the image completely.
-
Page 23: Calibration
Intelligent Camera User Manual Picture 2-17 Install Inside 2.4.3 Calibration Calibration is to mark the size of the square board at the top and the bottom of the image with square frames respectively. The red square frame is for far viewing while the blue one is for near viewing. - Page 24 Intelligent Camera User Manual When the lower edge of the board in his hands aligns to the bottom of the image, click “Pause” and adjust the size and position of near square frame to make it match with the board. Adjustment of the size and position of near frame is the same as that in step a.
- Page 25 Intelligent Camera User Manual To avoid imaging distortion, the center of the square frames should be as close to the mid-perpendicular of the image as possible. After finishing calibration, click “Save” to make settings effective and meanwhile the camera focal length and focus state is locked. If configuring focal length or focus state on other interfaces, the camera will restore to the locking status automatically in 5 minutes.
-
Page 26: Intelligent Configuration
Intelligent Camera User Manual Intelligent Configuration To ensure that the intelligent camera can normally capture head-shoulder and whole-body pictures, we need to configure the front-end devices through the client. Login to the web client and click “Intelligent” as shown below. Picture 3-1 Intelligent view interface 3.1 Intelligent Display Click “Intelligent”... -
Page 27: Select Target Filter
Intelligent Camera User Manual Picture 3-2 Live view interface of intelligent display 3.1.1 Select Target Filter Click the buttons on the top of the interface to filter targets. Options include object moving speed, moving direction and etc. The default is selecting all. If you want to exclude any option, just click the button and the selecting all button will be disabled at meantime. - Page 28 Intelligent Camera User Manual Notice: Some buttons are the same as those on the live view interface on main menu. Please refer to picture 2-11 for details. Stop Click this button to stop live view. Call Click this button to call the camera. This function is available when the camera supports and meanwhile the local PC should be installed with audio input device.
- Page 29 Intelligent Camera User Manual Picture 3-4 Display optimal snapshot In the snapshot bank, click on an image to view the corresponding head-shoulder snapshot and show the target ID, direction, speed and appear time, as shown below. Picture 3-5 Show head-shoulder snapshot Open Directory Click this button to open snapshots from the save path.
-
Page 30: Guard Area
Intelligent Camera User Manual Picture 3-6 Snapshot path 3.2 Guard Area Guard area is one or more polygon areas set in the surveillance image. Any moving objects entering it will be targeted automatically. Its function is to exclude moving objects in uninterested area out of the guard areas. - Page 31 Intelligent Camera User Manual Picture 3-7 Arming > Disarm Go to Intelligent > Intel Config > Guard Area, select the corresponding guard area and click “Delete” to delete Full Area Guard. Click “Add” to draw guard areas in the image as required; After finishing drawing, click “Save”, as shown in picture 3-8.
-
Page 32: Parameters
Intelligent Camera User Manual Picture 3-8 Guard area setting Notice: The guard area should be set large enough to ensure that the whole human body can show in the guard area. You can set no more than 3 guard areas and the vertexes for each polygon of guard area cannot be over 20. - Page 33 Intelligent Camera User Manual default and cannot be edited. The default Optimal Face (snapshot) Number is “one piece” and the other option is “several pieces”. If selecting Head-shoulder, the Face Output Mode can be set as Optimal Output or Continuous Output. If selecting Whole Person, parameters like Face Size, Face Output Mode, Optimal Face Number and Face Snapshot Interval will all be disabled.
-
Page 34: Arming
Intelligent Camera User Manual Picture 3-9 Parameters 3.4 Arming Go to Intelligent > Intel Config > Arming to configure the settings. “Disarm” is to disable the function of people recognition. “All-day-arming” is to enable the function of people recognition all day. ... -
Page 35: Access To Dpss
Intelligent Camera User Manual Picture 3-10 Arming setting 3.5 Access to DPSS If there is DPSS server in the system, set the following parameter in camera: Login to the web client and go to Intelligent > Intel Config > DPSS. Picture 3-11 DPSS settings Check “Enable”... -
Page 36: Basic Configurations
Intelligent Camera User Manual Basic Configurations 4.1 Image Adjustment 4.1.1 Brightness The image will look completely or partially dark and hard to recognize in low light condition. Web client provides the following methods to increase image brightness and ensure surveillance quality. Increase Image Brightness In the interface of Live View, click Image Adjustment and show the parameters, or go to Settings >... -
Page 37: White Balance
Intelligent Camera User Manual 4.1.2 White Balance The basic concept of white balance is “to restore white objects to be white regardless of the color temperature of the light source”. It can compensate color cast in pictures taken in specific light source. Go to Settings >... -
Page 38: Noise Reduction
Intelligent Camera User Manual When selecting Scheduled Day/Night from the dropdown list, click “Edit Time”, and edit Day Mode Start Time and Day Mode End Time in the popup interface. Alarm Triggered Cut In this mode, night cut is triggered by alarm input. Select Alarm Triggered Cut as the night cut mode and select Day or Night for Trigger Status. - Page 39 Intelligent Camera User Manual Picture 4-1 Advanced configuration A window of “Advanced User” pops up. Enter password and click “Confirm”, as shown in picture 4-2. Picture 4-2 Advanced user Enter the interface of “Advanced Configuration” and select “Enable” behind Function Switch > Dynamic Plug-in, and click “Save”, as shown in the picture.
- Page 40 Intelligent Camera User Manual Picture 4-3 Enable dynamic plug-in Go to Settings > System > System Maintenance > Dynamic Plug-in. On the dropdown list of Dynamic Content Plug-in, select “Wiper” and check “Enable”, and click “Save”, as shown in the picture. Picture 4-4 Enable wiper Go to Live View interface and unfold the PTZ control part.
-
Page 41: Motion Detection
Intelligent Camera User Manual 4.2 Motion Detection Detect movements in the defined area. Once the movement exceeds the defined sensitivity, an alarm will be triggered by Web Client. Motion detection supports full area detection or maximum 4 custom areas. The default is full area detection. Picture 4-5 Motion Detection... - Page 42 Intelligent Camera User Manual Go to Settings > Event > Intelligent Function > Motion Detection, and check “Enable”. Click “Clear All” and then “Edit” and the image will be divided into 16 columns and 12 lines of small squares. Click a square, drag toward lower right and click “Stop”. Then the area is set as the detected area and turns purple red.
-
Page 43: Alarm Linkage
Intelligent Camera User Manual Picture 4-7 Copy Check “Linkage Type”. It is the alarm output method when motion detection triggers an alarm. If checking snapshot, when motion detection triggers an alarm, the system will capture an image. Go to Settings > Storage > Snapshot to set image format, resolution and quality, and enable “Event Snapshot”... -
Page 44: Motion Detection Alarm Linkage
Intelligent Camera User Manual Notice: Go to Settings > Network > Other Protocols > SMTP to set the e-mail address. SMTP (Simple Mail Transfer Protocol) is a group of rules for sending email from source address to target address and it determines the transition method of email. Email address for sending alarm email User name and password of SMTP server Email address for receiving alarm email... - Page 45 Intelligent Camera User Manual Picture 4-9 Alarm Input Go to Settings > Event > Alarm Input and check “Enable”. Confirm if there is a parallel extension port and select a number from the dropdown list of Alarm Input ID (corresponding to the connected input ID). Confirm if the alarm input device is “Always Enabled”...
-
Page 46: Abnormality Linkage
Intelligent Camera User Manual usually loop, user must select “Always Enabled” from the dropdown list of Alarm Type. The default setting is “Always Disabled”. Configure durations. Refer to step 4) of Motion Detection. Check “Linkage Method”. Click “Save”. 4.3.3 Abnormality Linkage It is triggered when something abnormal happens. -
Page 47: Snapshot
Intelligent Camera User Manual Go to Settings > Camera > Video > Encoding Format, as shown in Picture 4-11. In Multi-stream option, select Single Stream, Dual-stream or Triple-stream from the dropdown list, and the selection takes effect after reboot. After enable, user can set parameters below the option accordingly. -
Page 48: Video Recording
Intelligent Camera User Manual 4.6 Video Recording 4.6.1 Configuration Go to Settings > Storage > Recording to configure video recording and scheduled recording. Recording Configuration: configure Recording Type (refer to part of Video Encoding), Code Stream Format (take effect after reboot), Prerecord and Recording Delay. -
Page 49: Management
Intelligent Camera User Manual 4.6.2 Management Go to Settings > Local Setting > Local Setting to configure Packet Size of video recording and set save path for video clipping and video download, as shown in Picture 2-12. Go to Settings > Storage > Storage Management to configure Disk Full Strategy. Select the disk No. -
Page 50: Download
Intelligent Camera User Manual Picture 4-14 Video playback Notice: If you cannot search video recordings on the Playback interface, please confirm if an SD card has been rightly installed and then restart the web client. 4.6.4 Download Enter video playback interface and download (make sure an SD card has been rightly inserted) video recording from SD card to local PC. -
Page 51: Clipping
Intelligent Camera User Manual Picture 4-15 Download video recording 4.6.5 Clipping Enter video playback interface and clip (make sure an SD card has been rightly inserted) video recording from SD card. Clipping save path can be configured in Settings > Local Setting >... -
Page 52: Web Client Upgrade
Intelligent Camera User Manual Picture 4-16 Firmware Upgrade Click “Upgrade” and select local upgrade file (<*.pkg> format). During upgrading, please do nothing but waiting. Re-login and the system will prompt to download plug-in when it is necessary to upgrade the web client. Refer to the following part of Web Client Upgrade. Method 2 Run IPCSearch and select the device. - Page 53 Intelligent Camera User Manual Go to Settings > Local Setting > Local Setting > Download Plug-in. Click “Download Plug-in” and follow the prompts to finish upgrade. Picture 4-17 Download Plug-in Method 2 After firmware upgrade, please re-login web client. The page will prompt to download a new plug-in.
-
Page 54: Restoration
Intelligent Camera User Manual 4.7.1 Restoration Go to Settings > System > System Maintenance and in the configuration management part, there are options of Partial Restoration and Complete Restoration. Partial Restoration: click this button and all parameters will restore to factory default except camera IP address, protocols, user info and RTSP authorization. -
Page 55: Settings
Intelligent Camera User Manual Settings 5.1 Network Access The previous part of Initial Configuration has introduced the steps to modify network parameters through IPCSearch so that the camera can access to the network. The camera supports several methods to access to the network including Ethernet and PPPoE. The following will introduce the steps to configure network parameters through the web client. -
Page 56: Pppoe
Intelligent Camera User Manual 5.1.2 PPPoE Go to Settings > Network > Other Protocols > PPP E, as shown in Picture 5-2 to enter user name and password, and save. Picture 5-2 PPPoE Setting 5.2 Register to VMS The camera can be registered to surveillance VMS through VSIP protocol. After the camera is rebooted, user can view camera live video at the client of VMS. - Page 57 Intelligent Camera User Manual Go to camera web client: Settings > Network > Access Protocol > VSIP, as shown in the picture. Confirm that VMS registration has been finished automatically, and VMS ADDRESS (IPv4) has been written automatically, and Camera UUID and Camera Password have been generated automatically.
-
Page 58: User Security
Intelligent Camera User Manual 5.3 User Security 5.3.1 User Management Go to Settings > System > User Security > User to enable anonymous access, add, modify or delete user. Picture 5-6 User info Anonymous access: Check “Anonymous Access” to enable anonymous login and there will be an option of “Anonymous Login”... -
Page 59: Ip Filter
Intelligent Camera User Manual Picture 5-8 Add user Notice: To ensure the safety of device on internet, it is strongly recommended that you set a strong password which is composed of at least 2 kinds of the following, digits, case-sensitive letters or specific symbols, and whose length ranges from 8 to 16 bits. -
Page 60: Security Service
Intelligent Camera User Manual White List includes IP addresses able to access to the camera, while Black List includes IP addresses unable to access to the camera. Enable IP Filter: Select filter method from the dropdown list according to request, or select “Disable” to disable IP filter. -
Page 61: Text Overlay
Intelligent Camera User Manual Picture 5-9 Security service 5.4 Text Overlay Display OSD text on the surveillance window, configuration steps as follows: Go to Settings > Camera > OSD, as shown in Picture 5-10. Picture 5-10 OSD Check the options and preview the result in the window. For example, if user checks “Time”, time will be displayed in the window. - Page 62 Intelligent Camera User Manual Click “Save” to save OSD setting. Click “Load” to load default font or China GB font. Click “Advanced” to set “Format”, “Font” and “Margin”. Click “Save”. Picture 5-11 Advanced Setting of OSD...
-
Page 63: Appendix: Glossary Of Terms
Intelligent Camera User Manual Appendix: Glossary of Terms Term Explanation 1080P Resolution of 1920*1080 pixels 720P Resolution of 1280*720 pixels High definition Network Address Translation DDNS Dynamic Domain Name Server DHCP Dynamic Host Configuration Protocol Internet Protocol MPEG4 Moving Pictures Experts Group Resolution of 352*288 pixels QCIF Resolution of 176*144 pixels...