Guard Tour - Kedacom IPC4X2 Series User Manual

HD Mini Dome Camera

1)
2)
5.5.2

Guard Tour

Guard Tour means the dome camera can perform preset operations if not receiving any
command in a specific period of time (i.e. the Waiting Time on the interface).
Configuration steps are as follows:
1)
According to PT position", the PT position will show on the live view interface in
PT position format.

Tilt Angle Range: Configure the PT scanning range in tilt, i.e. the PT rotation
angle range in tilt.
Note: The tilt angle range of different PTZ cameras differs. Please subject to actual
devices.

The default tilt angle range of IPC422-F112-N/NP is 15° ~ 90° .

The default tilt angle range of IPC422-F105-N/NP is 19° ~ 90° .

The default tilt angle range of IPC442-F205-N/NP is 20° ~ 90° .

The default tilt angle range of IPC422-F112-H is 8° ~ 90° .
Last Spot Recovery
Configure the rotation position of the PTZ after recovering from power-off.
Configuration steps are as follows:
Select the chechbox to enable "Last Spot Recovery";
Select recovery mode. Options include "Last Spot Recovery" and "Load Preset
When Power On";
 If selecting "Last Spot Recovery", the PT will load to the last position before
powering off automatically when it is powered again. Configure recovery time;
 If selecting "Load Preset When Power On", the PT will load to the selected
preset directly. Configure preset No.
Note:

When the time for which the PT stops at a position before powering off
exceeds the set Recovery Time, it will return to this position automatically
after powering on again. If the time is shorter than the set Recovery Time,
the PT will return to the previous position of the one when it is powered off.
 When selecting "Load Preset When Power On" as the recovery mode,
"Recovery Time" will change into "Preset". Select a preset number from the
dropdown list for the PT to load to when it recovers from power-off.
Click "Save" to validate settings.
Go to Settings > Camera > PTZ > Guard Tour;
52
User Manual