Alarm Output; Abnormality Linkage - Kedacom IPC4X2 Series User Manual

HD Mini Dome Camera

Note: Select any duration with a mouse, and drag the blue bar on the timeline as a whole
without changing the length of recording duration
If user sets several alarm input ports, select "All" under "Copy to Alarm" to copy all
8)
configurations of current alarm input to other alarm input ports;
Click "Save" to validate setting.
9)

6.3 *Alarm Output

Before starting configuration, make sure that the camera has connected to alarm output devices
such as alarm bell. The camera will transfer the received alarm signal to the alarm output device to
trigger an alarm. Configuration steps are as follows:
1) Go to Settings > Event > Alarm Output;
2) Please select an option from the dropdown list according to actual request. Options vary from
"Without Delay" to "10 min", and the default is 5s. After the "Delay Time", the alarm will be
cancelled automatically;
Note: The default duration of alarm output is 5s, and the delay time means the prolonged
period of time after the default 5s.
Click "Save" to validate setting.
3)

6.4 Abnormality Linkage

Configure the alarm linkage method for abnormal events, and the camera will judge if it is
necessary to trigger an alarm. Configuration steps are as follows:
1) Go to Settings > Event > Abnormality Linkage;
Delete duration: click "Delete All" above the timeline to delete all the durations.
Select any duration and click "Delete" on the popup window or above the timeline to
delete the duration.
Picture 6-27 Alarm output
88
User Manual