Image Enhancement - Kedacom IPC4X2 Series User Manual

HD Mini Dome Camera

5.1.6 *IR
Select "Disable" or "Auto" from the dropdown list of IR mode, and the default mode is
"Auto". In low light situation, the camera will enable IR lamp automatically to get better
surveillance images.
5.1.7

Image Enhancement

When there are many noise points caused by environment and camera lens, noise
reduction function can be enabled to correct images. Images processed by 2D noise
reduction will look softer; while those processed by 3D noise reduction will have
obviously fewer noise points and will look much clearer.

Latency: When it detects the light brightness in the environment meets the night
cut condition and lasts for a period of time longer than the preset latency, the
camera will trigger night cut automatically. The range of it is 5s ~ 120s.

Night Cut Threshold: The threshold from day mode to night mode. The lower the
value is, the easier it will trigger night cut.
Scheduled Day/Night: Under "Scheduled Day/Night" mode, click "Edit Time" and
configure "Day Mode Start Time" and "Day Mode End Time" on the popup interface.
The camera will switch day and night modes according to the scheduled durations.
Picture 5-6 Edit time
Picture 5-7 IR
39
User Manual