Chapter 1
1.1
Introduction
The ProPak6 is a high performance Global Navigation Satellite System (GNSS) receiver capable of
receiving and tracking different combinations of GNSS signal and integrated L-Band on 240 channels.
GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS support are standard and the ProPak6 adaptability
offers multi-system, frequency and size configurations for any application requirement. ProPak6 models
have a NovAtel OEM638 receiver card; some models also include a NovAtel OEM615 receiver card for
additional functionality. Excellent acquisition and re-acquisition times allow this receiver to operate in
environments where very high dynamics and frequent interruption of signals can be expected. The
ProPak6 options include integrated radio and dual input heading options to provide a tightly integrated
and rugged solution for any application.
1.2
System Components
The ProPak6 system includes the following components:
•
OEM638 receiver with built in Wi-Fi, Bluetooth, USB 2.0 and 4 GB of onboard memory
•
12 VDC power adapter (CLA) with slow blow fuse
•
Null modem cable
•
DB9 male extension cable
•
I/O DB9 male interface cable
•
Mounting bracket and hardware
Refer to Section 2.2.1, ProPak6 Cables on page 21, Section 2.6.1, Mounting the GNSS Antenna on
page 29 and Appendix A, Technical Specifications on page 110 for details on cables and mounting the
ProPak6.
Refer to Section 2.1, Additional Equipment Required on page 20 for a equipment not included with the
ProPak6.
1.3
Models and Features
The ProPak6 is available in several different firmware models whose configurations may include other
additional features.
Model Configuration
ProPak6 Dual/Cellular
ProPak6 Dual
PP6 Single/Cellular
PP6 Single
15
Introduction
Table 1: ProPak6 Model Features
External
Oscillator
■
■
Firmware Features
Dual
Cellular/
Antenna
HSPA
■
■
■
■
ProPak6 Installation and Operation User Manual Rev 4
OEM638
OEM615
Card
Card
■
■
■
■
■
■