72 | Crystal-M Imager | Basic Operation (operator mode)
Basic Operation (operator mode)
This section focuses on the basic operating principles of the printer. After
reading this chapter, the operator should be able to produce diagnostic usable
hardcopies. No special technical skills are required.
All basic operator functions can be activated directly by pressing a single key
on the keypad.
Function / Task
'Pausing the print queue'
'Viewing the film count
info'
'Viewing the printer sta-
tus'
'Deleting print jobs'
Topics:
•
Managing the print queue
•
Pausing the print queue
•
Viewing the film count info
•
Viewing the printer status
•
Deleting print jobs
•
Changing the film format of the trays
•
Loading films
3852B EN 20210601 1655
Description
To pause the print queue. The printer will finish
the current print job, but will not start the next
print job.
To view the number of films left in the trays.
To view the current events.
To remove print jobs from the print queue. Print
jobs that are deleted will not be printed.