Basic Operation (Operator Mode) - AGFA Drystar 5301 User Manual

Basic Operation (operator mode)

This section focuses on the basic operating principles of the printer. After
reading this chapter, the operator should be able to produce diagnostic usable
hardcopies. No special technical skills are required.
All basic operator functions can be activated directly by pressing a single key
on the keypad.
Function / Task
'Managing the print
queue'
'Pausing the print queue'
'Viewing the film count
info'
'Viewing the printer
status'
'Loading films'
Topics:
• Managing the print queue
• Pausing the print queue
• Viewing the film count info
• Viewing the printer status
• Deleting print jobs
• Changing the film format of the trays
• Loading films
Drystar 5301, Drystar 5302 | Basic Operation (operator mode) | 71
Description
Jobs that have been received are put in a print
queue, waiting to be printed.
To pause the print queue. The printer will finish
the current print job, but will not start the next
print job.
To view the number of films left in the trays.
To view the current events.
Instructions for loading new films on the printer.
2831E EN 20161128 1410