Mitsubishi Electric MELSERVO-J3 Series Handbook page 498

Part 8: Review on Replacement of Optional Peripheral Equipment
Application
Servo amplifier power
connector
(1 kW or less)
Servo amplifier power
connector
(2 kW)
Servo amplifier power
connector
(3.5 kW)
CN5 communication cable
Battery for junction battery cable
Monitor cable
Protection coordination cable
(30 kW or more)
CN40/CN40A connector set
Termination connector
Magnetic contactor wiring
connector
Digital I/O connector
STO cable
Note 1. When using 15 kW or more HG-JR 1000 r/min series or 22 kW or more HG-JR 1500 r/min series, replace with the MR-
ENECBL_M-H-MTH cable or MR-ENECNS connector set.
2. These replacement models do not have compatibility in mounting. The power connector is supplied with a servo amplifier for
MR-J4 series. Replace the existing connectors with the ones supplied with the servo amplifier.
3. Use the dedicated battery of each series.
4. Supplied with converter unit.
5. MR-D05UDL3M-B is in production.
: Compatible, △: Compatible with condition, ×: Not compatible
6.
MR-J3 series
CNP1 54928-0670
CNP2 54927-0520
CNP3 54928-0370
721-207/026-000
CNP1
(PC4/6-STF-7.62-CRWH)
721-205/026-000
CNP2
(54927-0520)
721-203/026-000
CNP3
(PC4/3-STF-7.62-CRWH)
CNP1 PC4/6-STF-7.62-CRWH
CNP2 54927-0520
CNP3 PC4/3-STF-7.62-CRWH
MR-J3USBCBL3M
MR-J3BTCBL03M
MR-J3CN6CBL1M
MR-J3CDL05M
MR-J2CN1-A
MR-J3-TM
MR-J4 series
06JFAT-SAXGDK-H7.5
05JFAT-SAXGDK-H5.0
03JFAT-SAXGDK-H7.5
06JFAT-SAXGFK-XL
05JFAT-SAXGDK-H5.0
03JFAT-SAXGFK-XL
06JFAT-SAXGFK-XL
05JFAT-SAXGDK-H5.0
03JFAT-SAXGFK-XL
MR-BT6VCBL03M
(Note 4)
MR-D05UDL3M-B
8 - 13
Compatibility
Note
6
(Note )
2
(Note )
2
(Note )
2
(Note )
2
(Note )
Connector shape is changed
because the manufacturer is
2 changed.
(Note )
( ) is for MR-J3-200_(-RT).
2
(Note )
2
(Note )
2
(Note )
2
(Note )
Use the same combination.
Use the dedicated battery
(Note 3)
of each series.
Use the same combination.
Use the same combination.
Use the same combination.
Not required
Use the same combination.
Socket:
GFKC 2.5/2-STF-7.62
Use the same combination.
connector:
17JE23090-02(D8A)K11-
CG
When not using the STO
function, attach the short-
(Note 5)
circuit connector came with
the servo amplifier to CN8.