Mr-J3-_A_ Parameter Diversion Procedure; Parameter Reading From The Servo Amplifier Mr- J3-_A; Converting The Parameters Of Mr-J3-_A_ And Writing Them To The Mr-J4-_A; Servo Amplifier - Mitsubishi Electric MELSERVO-J3 Series Handbook

Hide thumbs Also See for MELSERVO-J3 Series:
Table of Contents

Advertisement

Part 6: Common Reference Material

2.2.2 MR-J3-_A_ parameter diversion procedure

• Parameter reading from the servo amplifier MR- J3-_A_

Start MR Configurator2(SW1DNC-MRC2-E)
Create a new project.
Read the servo parameters.
Save the parameter file.
• Converting the parameters of MR-J3-_A_ and writing them to the MR-J4-_A_ servo amplifier
Create a new project.
Change MR- J3-_A_ parameters to
MR-J4-_A_ parameters.
Write the changed parameters to the MR-J4-
_A_ servo amplifier.
POINT
Parameter conversion: Set the parameter block within the readable range to
•••
A connection with a PC-AT compatible personal computer is required.
USB communication (MR-J3USBCBL3M)
read changes from the initial value.
6 - 50

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents