3-4-6 Attaching the Controller and Sensor Head Connection Cable
Insert the controller connector on the sensor head connection cable into the connector for the
sensor head connection cable on the controller.
Insert the connector firmly. Risk of sensor head or controller damage if not completely connected.
3-4-7 Removing the Controller and Sensor Head Connection Cable
Grasp the controller, and while pressing on the lock release lever on the controller connector
of the sensor head connection cable, pull toward you to disconnect.
If you attempt to disconnect the cable by pulling it without pressing the lock release lever,
cable wire breakage and connector damage may occur.
© Panasonic Industrial Devices SUNX Co., Ltd. 2019
Insert
Lock release lever
Pull out
INSTALLATION AND CONNECTIONS
3-11