System Configuration - Panasonic HG-S Series User Manual

BEFORE USING THIS PRODUCT

2-2 System Configuration

The HG-S series consists of controllers, sensor head connection cables, and sensor heads.
For the controllers, master units (2 types) and slave units (5 types) are available. Up to 15 slave
units can be connected per master unit. (When communication unit consolidated: up to 14 slave
units)
For the sensor heads, 8 types are available.
● When connecting slave units to a master unit, connect only NPN output types, or only
PNP output types. Dissimilar output types cannot be connected together.
● To use an air-driven type and 50mm type sensor head, connect to an HG-SC series con-
troller manufactured in February 2019 or later.
Sensor head connection cable
Straight connector
CN-HS-C3 / Cable length 3m
CN-HS-C7 / Cable length 7m
CN-HS-C10 / Cable length 10m
CN-HS-C20 / Cable length 20m
L-shaped connector
CN-HS-C3L / Cable length 3m
CN-HS-C7L / Cable length 7m
CN-HS-C10L / Cable length 10m
CN-HS-C20L / Cable length 20m
2-6
Controller - Slave unit
HG-SC111 / High-performance, NPN output type
HG-SC111-P / High-performance, PNP output type
HG-SC112 / Standard, NPN output type
HG-SC112-P / Standard, PNP output type
HG-SC113 / Wire-saving
Controller - Master unit
HG-SC101 / NPN output type
HG-SC101-P / PNP output type
Sensor head
HG-S1010 /
General purpose, standard, 10mm type
HG-S1010R /
General purpose, low measuring force, 10mm type
HG-S1110 /
High-performance, standard, 10mm type
HG-S1110R /
High-performance, low measuring force, 10mm type
HG-S1032 /
General purpose, standard, 32mm type
HG-S1050 /
General purpose, standard, 50mm type
HG-S1010-AC /
General purpose, air-driven type
HG-S1110-AC /
High accuracy, air-driven type
© Panasonic Industrial Devices SUNX Co., Ltd. 2019