Connection Method - Panasonic HG-S Series User Manual

3-5-1 Connection Method

To mount a controller, refer to "3-1 Mounting the Controller".
1.
Mount one master unit on the DIN rail.
2.
Remove the connector cover.
3.
Mount each slave unit one at a time on the DIN rail. Remove all connector covers except
for the cover on the end slave unit.
4.
Slide each slave unit to connect the female and male connectors.
© Panasonic Industrial Devices SUNX Co., Ltd. 2019
INSTALLATION AND CONNECTIONS
Master unit
Connector cover
Slave unit
Slide
3-13