FUNCTION SETTINGS
5-8 Initialization (
Structure of initialization menu
●
Long-press for 2 seconds
CALC: Only appears on master unit
You can return all controller settings to the factory default state.
For the default value of each setting, refer to "5-1-3 Setting Items and Default Values".
<Reference>
● Executing initialization does not initialize settings stored in a bank.
● If initialization is executed, the pressure check set value will be reset to the default value of the
sensor head that is connected.
● The calibration setting and key lock setting are not initialized.
5-98
)
[Initialization]
© Panasonic Industrial Devices SUNX Co., Ltd. 2019