Panasonic HG-S Series User Manual page 34

INSTALLATION AND CONNECTIONS
5.
Attach end plates MS-DIN-E (optional) with the flat side facing in so as to enclose the con-
nected units at the ends.
End plate MS-DIN-E
(option)
6.
Tighten the screws to fasten the end plates.
The tightening torque should be 0.3N•m or less.
Take care if the screw is tightened with a torque of 0.3N•m or more, this product may get
damaged.
3-14
End plate MS-DIN-E
(option)
© Panasonic Industrial Devices SUNX Co., Ltd. 2019