Panasonic HG-S Series User Manual page 151

Setting method
Long-press for 2 seconds
Setting item
Application (APPLI)
■ Maximum Value (
This application determines the largest measured value of the master unit and slave units.
Master
unit
Slave
unit 1
• None of the connected slave units output the judgment result. (Always OFF)
• All sensor head indicators show the judgment result of the master unit.
• The response time for judgment output is the response time setting on the master unit and
slave units plus 3ms.
• The judgment value (JUDGE.V) (calculation result) appears on the digital display / MAIN (white) of the master
unit. The normal measured value (NORM.V) appears on the digital display / MAIN (white) of each slave unit.
© Panasonic Industrial Devices SUNX Co., Ltd. 2019
Maximum value (MAX)
Minimum value (MIN)
Flatness (FLAT)
Average value (AVERAG)
Standard difference (STAND)
Torsion (TORSIN)
Curvature (CURVEA)
Thickness (THICK)
)
Slave
unit 2
Maximum
value
Measured value of "slave unit 2" is maximum value
and becomes calculated value of master unit.
: Select
: Finalize
Set values
FUNCTION SETTINGS
Default value
MAX
5-79