Panasonic HG-S Series User Manual page 60

BASIC OPERATION
<3-point teaching>
1.
Long-press the LEFT key for 2 seconds. (The number of lit increments in the circle meter
increases.)
2.
"SET.1" appears in the digital display / SUB (green), and the digital display / MAIN (white)
blinks.
3.
Measure the HIGH-side defective workpiece, and press the ENTER key.
4.
"SET.2" appears in the digital display / SUB (green).
Measure the good workpiece, and press the ENTER key.
5.
"SET.3" appears in the digital display / SUB (green).
Measure the LOW-side defective workpiece, and press the ENTER key.
4-16
Long-press for 2 seconds
© Panasonic Industrial Devices SUNX Co., Ltd. 2019