Panasonic HG-S Series User Manual page 168

FUNCTION SETTINGS
When set to user settings (USER)
●
1.
When set to "USER", move the spindle to the zero point position and press the ENTER
key.
2.
Move the spindle to the target point position and press the ENTER key.
3.
Enter the target value by using the LEFT / RIGHT key (
the UP / DOWN key ( / ) to change values.
User settings (USER)
5-96
Target point
Setting item
Adjustment value 2
(AJ.VAL2)
/ ) to move through digits and
Set values
-199.9999 to 199.9999 (mm)
© Panasonic Industrial Devices SUNX Co., Ltd. 2019
Finalize
Default value
10.0000