Panasonic HG-S Series User Manual page 130

FUNCTION SETTINGS
<Operation of output 1/2/3 indicators when external output is set>
External
output
HIGH
3-value GO
LOW
Outside upper / lower limit
GO
2-value
Alarm
Judgment 1
Judgment 2
Logic
Alarm
ALL GO
(Connected controllers)
Logic 2 GO (Master unit)
Alarm
(One of connected controllers)
Note: The indicators are normally lit up, and turn off when an alarm occurs.
<Reference>
● For controller I/O circuit diagrams, refer to "3-6-2 I/O Circuit Diagrams".
● For the output operation settings, refer to "5-2-12 Output Operation (
● For the alarm function, refer to "5-3-9 Alarm Setting (
5-58
Output operation
Output 1 indicator (Orange)
Output 2 indicator (Orange)
Output 3 indicator (Orange)
Output 1 indicator
(Orange)
Lights up
Turns OFF
Turns OFF
Lights up
Turns OFF
TurTurns OFFFF
Lights up
Turns OFF
Turns OFF
Lights up
Turns OFF
Turns OFF
i
)".
© Panasonic Industrial Devices SUNX Co., Ltd. 2019
Output 2 indicator Output 3 indicator
(Orange)
Turns OFF
Lights up
Turns OFF
Turns OFF
Lights up
Lights up → Turns OFF
Turns OFF
Turns OFF
Lights up
Lights up → Turns OFF
Turns OFF
Turns OFF
Lights up
Lights up → Turns OFF
Turns OFF
)".
(Orange)
Turns OFF
Turns OFF
Lights up
Turns OFF
Turns OFF
(Note)
Turns OFF
Turns OFF
(Note)
Turns OFF
Turns OFF
(Note)