BASIC OPERATION
4-1 Explanation of Basic Operation
4-1-1 From Power ON to Mode Selection
This section explains the modes and shortcut functions that can be used from the home screen
after the power is turned ON.
Power ON
<Base screen>
4-2
Long-press for
2 seconds
Display switching mode (refer to page 4-5)
You can change the display of the digital
display / SUB (green) as needed for the
task.
Long-press for
2 seconds
Teaching mode (refer to page 4-11)
You can automatically set HIGH and LOW
set values and output HI / GO / LO judg-
ment results.
Long-press for
2 seconds
Setting mode (refer to page page 5-1)
You can change basic settings or config-
ure advanced function settings.
Convenient functions such as calculation,
connection copy, and maintenance infor-
mation support a wide range of applica-
tions.
Long-press for
2 seconds
Bank mode (refer to page 4-20)
You can save / load the HIGH set value or
LOW set value to / from a specified bank
(1 to 3).
+
Long-
press for 3 seconds
Key lock (refer to page 4-24)
You can prevent accidental key operation
during measurement.
Short press
Presets (refer to page 4-8)
You can perform zero-point adjustment,
and shift to any preset value.
© Panasonic Industrial Devices SUNX Co., Ltd. 2019