Removing The Sensor Head And Sensor Head Connection Cable - Panasonic HG-S Series User Manual

INSTALLATION AND CONNECTIONS

3-4-2 Removing the Sensor Head and Sensor Head Connection Cable

1.
Turn the fastening ring on the sensor head connector in the direction of the arrow to loosen
the ring.
2.
Grasp the sensor head connector and pull up to remove.
● When disconnecting, always make sure that the fastening ring has been completely loos-
ened before pulling out the cable. Risk of damage if you pull the cable with excessive
force (15N or more) with the fastening ring tightened.
● If changing the type of sensor head to be connected, always switch the power OFF then
ON.
3-8
1
© Panasonic Industrial Devices SUNX Co., Ltd. 2019
2