Checking The Embroidery Area; Displaying The Fabric While Aligning The Embroidery Position - Brother PR1055X Operation Manual

The embroidery color order is rearranged and sorted by thread
colors.
Touch to cancel the color sorting and embroider with
the embroidery color order.
Note
• This function does not work on overlapping
designs.
72
CHECKING THE EMBROIDERY
AREA
The pattern is usually placed at the center of the
embroidery frame. If you want to change where in the
fabric the pattern will be embroidered, you can check the
position before starting embroidering.
Displaying the fabric while aligning the
embroidery position
The fabric hooped in the embroidery frame can be displayed
on the LCD so that the embroidery position can be aligned.
This feature can be used from the pattern editing screen and
embroidering settings screen.
Note
• When installing the optional embroidery frame
holder D, embroidery holder E, Cap frame, or
Cylinder frame, the built-in camera cannot be used
to align the embroidering position.
• For details on using fabric thicker than 2 mm (5/64
inch), refer to "Positioning the pattern on thick
fabric" on page 74.
a Hoop the fabric in the embroidery frame, and then
attach the frame to the machine.
b Select the pattern.
Note
• Make sure [Fabric Thickness Check] is set to [OFF]
when using light to medium weight fabrics.
(page 74)
c Specify the appropriate image settings in advance.
(page 73)
• Better scanning results can be achieved with the
appropriate settings.