Brother PR1055X Operation Manual page 52

• To tighten spacing, touch
1
1 Touch
to change a repeated pattern back to
one single pattern.
Memo
• You can only adjust the spacing of patterns
included in the red frame.
e Complete repeated patterns by repeating steps
d
through .
f After making the desired changes, touch
Memo
• When there are two or more patterns, all patterns
will be grouped together as one pattern in the red
frame.
• When changing the direction in which the pattern
will be repeated, all of the patterns in the red frame
will automatically be grouped as one repeating unit.
50
■ Repeating one element of a repeated pattern
.
a
b
.
b
c
d
By using the Cut function, you can select one element of a
repeated pattern and repeat only that single element. This
function allows you to design complex repeated patterns.
Choose the direction in which the repeated pattern will
be cut.
• Touch to cut horizontally.
• Touch to cut vertically.
 The pattern direction indicator will change
depending on the direction selected.
Use and to select the cut line.
 The cut line will move.
Touch .
 The repeated pattern will be divided into separate
elements.
Touch .