Deselect Region Setting - Brother PR1055X Operation Manual

Deselect region setting

The deselect region setting (which specifies that a thread color
will not to be embroidered) can be applied to a part of the
pattern with a specific color. In this way, you can arrange the
embroidery without actually editing the pattern.
a Touch in the embroidering settings screen.
 A screen appears, allowing the needle bar numbers
to be selected.
b From the thread color sequence display, select the
thread color that will not be embroidered.
 The selected thread color is highlighted in blue.
• If the same thread color is used more than once, they
can be combined. After selecting a thread color,
touch . The key changes to
colors in the thread color sequence display that are
the same as the one that was selected are highlighted
in blue.
c Touch
 The
1
2 The parts of the pattern that will not be embroidered are
Repeat steps
d
not be embroidered.
, and all thread
ADVANCED EMBROIDERY
.
mark appears to indicate that the selected
thread color will not be embroidered.
1
mark
hidden.
b c
and for all thread colors that will
2
3
125