Checking The Embroidery Area; Temporarily Stopping To Check The Area; Continuing To The Embroidering Screen - Brother Entrepreneur Pro PR1000e Operation Manual

Users manual - english
Hide thumbs Also See for Entrepreneur Pro PR1000e:
Table of Contents

Advertisement

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

9. Checking the Embroidery Area

Check the embroidery area to make sure that the embroidery will be sewn in the desired location and will
not be misaligned and that the embroidery frame will not hit the presser foot.
If the embroidery frame is not correctly positioned, it moves to the correct position, and then the
embroidering position is indicated.
● If you are embroidering a large project
such as a jacket or curtains, using the flat,
quilt or jumbo frame, your embroidering
may be interrupted by the presser feet not
in use catching on the fabric outside of the
design area. Try to stitch the design as
close to the center of the embroidery
frame, using needle bars 3 through 7,
keeping the head of the machine as
centered as possible. (Refer to page 108 or
132 to select the needle bar).
1
Touch
The presser foot is lowered and the
embroidery frame moves to show the
embroidery area.
2
The corners of the octagon showing the
embroidery area for the pattern are
indicated by changing direction.
Carefully watch the movement of the
embroidery frame and check that the
embroidery is sewn in the desired location
and that the embroidery frame does not hit
the presser foot.
Temporarily stopping to
check the area
The embroidery frame can be temporarily stopped
at a desired position or the checking of the
embroidering area can be stopped.
Note
.
1
When the embroidery frame moves to the
desired position, touch
The embroidery frame stops moving, and
the next screen appears.
2
1 Touch to continue moving the frame.
2 Touch to stop checking the embroidering area.
2
To continue moving the embroidery frame,
touch
. To stop checking the
embroidering area, touch
Continuing to the
embroidering screen
After finishing the necessary operations in the
embroidering settings screen, continue to the
embroidering screen.
1
Touch
.
The embroidering screen appears.
Checking the Embroidery Area 53
again.
2
1
.

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Entrepreneur pro pr-1000

Table of Contents