Brother PR1055X Operation Manual page 70

Embroidery frames that do not use embroidery frame
holders
Embroidery frame
Advanced cap frame 2 130 mm (W) × 60 mm (H)
(optional) (5-1/8 inches (W) × 2-3/8
inches (H))
Use when embroidering caps. Baseball
(golf) caps, tulip hats and bucket hats
can be embroidered with these frames.
This frame cannot be used with hats
having a front area of 50 mm (2 inches)
or less, such as sun visors and
children's hats. In addition, this frame
cannot be used with hats that have a
brim longer than 80 mm (3-1/8 inches).
*
Flat brim cap frame 130 mm (W) × 60 mm (H)
(optional) (5-1/8 inches (W) × 2-3/8
inches (H))
Use when embroidering caps. In
addition to caps compatible with
advanced cap frame 2, this frame can
be used to embroider flat brim caps
and children's caps. Compared with
advanced cap frame 2, this frame can
be used to embroider closer to the cap
brim.
*
Wide cap frame 360 mm (W) × 60 mm (H)
(optional) (14 inches (W) × 2-3/8 inches
(H))
Use when embroidering caps. This
frame has larger embroidering area
than other cap frames. This frame
cannot be used with hats having a front
area of 50 mm (2 inches) or less, such
as sun visors and children's hats. In
addition, this frame cannot be used
with hats that have a brim longer than
80 mm (3-1/8 inches).
*
Magnetic sash frame 360 mm (W) × 200 mm (H)
(optional) (14 inches (W) × 7-7/8 inches
(H))
Use when embroidering connecting
characters or patterns, combined
patterns or large patterns. It is also
convenient to use when embroidering
quilt sash patterns.
*
68
Embroidering area
Usage
Reference page
Embroidery frame
Cylinder frame 90 mm (W) × 80 mm (H)
(optional) (3-1/2 inches (W) × 3 inches
(H))
Use when embroidering tubular and
curved fabric, such as shirt sleeves and
turtlenecks.
*
Note
• The embroidery frame indicators show all
embroidery frame sizes in which the embroidery
pattern can be embroidered. Be sure to use an
embroidery frame of the most suitable size. If the
embroidery frame that is used is too large, the
pattern may be misaligned or the fabric may
pucker.
• All genuine embroidery frames that can be used
with PR series machines can be installed on this
machine.
• When embroidering with an optional embroidery
frame (jumbo frame, border frame, quilt frame, flat
frame or magnetic sash frame), the included wide
table must be installed onto the machine.
• Due to the weight of the embroidery frame and
fabric it is recommended that the included wide
table be used, to prevent the frame holder from
bending, which may result in the distortion of your
design or machine damage.
Embroidering area
Usage
Reference page