Checking The Embroidery Area; Temporarily Stopping To Check The Area - Brother PR-650 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

9. Checking the Embroidery Area

Check the embroidery area to make sure that the embroidery will be sewn in the desired location and will
not be misaligned and that the embroidery frame will not hit the presser foot.
If the embroidery frame is not correctly positioned, it moves to the correct position, and then the
embroidering position is indicated.
1 Touch
The presser foot is lowered and the
embroidery frame moves to show the
embroidery area.
2 The corners of the octagon showing the
embroidery area for the pattern are
indicated by changing direction.
Carefully watch the movement of the
embroidery frame and check that the
embroidery is sewn in the desired location
and that the embroidery frame does not hit
the presser foot.
.
Temporarily stopping to
check the area
The embroidery frame can be temporarily stopped
at a desired position or the checking of the
embroidering area can be stopped.
1 When the embroidery frame moves to the
desired position, touch
The embroidery frame stops moving, and
the next screen appears.
2
1 Touch to continue moving the frame.
2 Touch to stop checking the embroidering area.
2
To continue moving the embroidery frame,
touch . To stop checking the
embroidering area, touch
Checking the Embroidery Area 51
2
again.
1
.