Brother PR1055X Operation Manual page 76

■ Displaying the fabric in the background
Whether or not the fabric is displayed in the background
can be specified. In addition, [Standard] or [Fine] can be
selected for the quality of the background image.
1 Set to [ON] to leave the fabric displayed in the
background.
2 When set to [OFF], the background will disappear.
3 Select the quality of the background image.
4 Remove the background image completely.
■ Positioning the pattern on thick fabric
When positioning the pattern on the fabric thicker than 2
mm (5/64 inch), the fabric may not be detected correctly.
In order for the fabric to be correctly detected, its
thickness must first be measured.
Hoop the fabric in the embroidery frame, and then
a
attach the frame to the machine.
b Select the pattern.
c Touch .
 The embroidery settings screen appears.
Locate [Fabric Thickness Check] in the Settings pages.
d
e Select [ON] to activate the setting.
f Touch to return to the previous screen.
g Touch .
h When the message the machine moves appears, touch
.
74
i Affix the embroidery positioning sticker to the fabric
within the area indicated by the red frame in the LCD,
and then touch
1
2
3
4
j When the following message appears, remove the
embroidery positioning sticker, and then touch
 The embroidery positioning sticker affixed to the
fabric is detected, and then the embroidery frame
will be moved.
Continue with step
k
with the desired embroidery position.
• Use fabrics with a thickness of less than 2 mm
(approx. 5/64 inch). Using fabrics thicker than 2
mm (approx. 5/64 inch) may cause the needle to
break.
.
.
f
on page 73 to align the pattern
CAUTION