Brother PR1055X Operation Manual page 188

Error messages
11 Communication time out error.
12 Data receiving command error.
13 EEPROM read/write error.
14 Embroidering stop.
15 Failed to save file.
16 Go to Embroidering Screen and press the unlock
key.
17 Impossible to set the start & the end points.
18 Inappropriate needle stop position
19 Includes a special pattern that cannot be saved to
external memory. Save the pattern in the machine's
memory.
20 Machine PCB power off.
21 Machine PCB reset.
22 Main motor current error.
23 Main motor encoder connect error.
24 Main motor encoder signal error.
25 Main motor rotate error.
26 Main motor speed error.
27 Needle bar case home position error.
28 Needle bar case position error
29 Needle case motor has been locked.
30 Needle threader error
186
Cause/solution
When this message is displayed, consult your nearest authorized Brother
dealer.
When this message is displayed, consult your nearest authorized Brother
dealer.
When this message is displayed, consult your nearest authorized Brother
dealer.
When this message is displayed, consult your nearest authorized Brother
dealer.
This message is displayed when you try to save more than 100 camera
image or settings screen image files in the USB media. In this case, delete a
file from the USB media or use different USB media.
This message is displayed when the thread trimming button is pressed while
a screen other than the embroidering screen or embroidering settings screen
is displayed. Display either the embroidering screen or embroidering settings
screen.
This message is displayed when embroidery cannot begin from the specified
starting position. Change the starting position or move the frame and change
the embroidering position. (page 126)
This message is displayed when the needle has stopped at an incorrect
position. Turn the handwheel so that the mark on the handwheel is at the top,
and then touch .
This message is displayed when you try to save a copyright protected
pattern to USB media or computer.
According to copyright laws, patterns that are illegal to reproduce or edit
cannot be saved to USB media or computer. If this message is displayed,
save the pattern in the machine's memory.
When this message is displayed, consult your nearest authorized Brother
dealer.
When this message is displayed, consult your nearest authorized Brother
dealer.
When this message is displayed, consult your nearest authorized Brother
dealer.
When this message is displayed, consult your nearest authorized Brother
dealer.
When this message is displayed, consult your nearest authorized Brother
dealer.
When this message is displayed, consult your nearest authorized Brother
dealer.
When this message is displayed, consult your nearest authorized Brother
dealer.
This message is displayed when the needle bar case cannot be moved to its
initial position. Touch to automatically reset the needle bar case.
This message is displayed when the needle bar case has stopped at an
incorrect position. Touch
This message is displayed when the needle bar case motor has locked up.
Touch to automatically reset the needle bar case.
This message is displayed when the automatic needle-threading mechanism
does not operate correctly. Remove the thread entangled in the automatic
needle-threading mechanism, and then touch
to automatically reset the needle bar case.
.