Installing The Bobbin Case; Selecting An Embroidery Pattern; General Pattern Selection - Brother PR1055X Operation Manual

Installing the bobbin case

a Insert the bobbin case into the hook.
Insert the bobbin case while aligning the tab on the
bobbin case with the notch in the hook, as shown in the
illustration.
• Fully insert the bobbin case until it snaps into place.
b Close the hook cover.
SELECTING AN EMBROIDERY
PATTERN

General pattern selection

The procedure for selecting a pattern differs depending on the
1 Tab
type of pattern; however, the general procedure for selecting a
2 Notch
pattern is described below.
a
■ Pattern type selection screen
b
In the pattern type selection screen, touch the key for
the desired category.
1
2
3
4
8
9
1 Embroidery patterns (page 36)
2 Frame patterns (page 37)
3 Character patterns (page 39)
4 Decorative alphabet patterns (page 41)
5 Monogram and frame patterns (page 38)
6 Utility embroidery patterns/Large buttonhole patterns
(page 37)
7 Quilting border patterns (page 105)
8 Patterns stored in the machine's memory (page 130)
9 Patterns saved on USB media (page 130)
0 Patterns saved on a computer (page 130)
A Patterns to be transferred via the wireless network
(page 130)
In the pattern category list screen, which appears next,
touch the desired pattern category to select it.
BASIC EMBROIDERY
5
6
7
0
A
35
2