Brother PR1055X Operation Manual page 55

k Touch to display the needle drop point.
l Touch the positioning keys to move the embroidery
frame until the thread mark on the fabric is aligned on
the needle drop point in the camera view window.
1 Thread mark on the fabric
2 Positioning keys
• Touch to check the embroidering position.
Memo
• Touch to enlarge the camera view. By
enlarging the camera view, you can make a close
adjustment for the needle drop position moving the
embroidery frame little by little.
Touch to return to the normal camera image.
m If the pattern position cannot be aligned using the
positioning keys, rehoop the fabric, and then try again
to align the position with the positioning keys.
Note
• After you have aligned the position of the combined
border pattern, do not rotate the pattern in the
embroidering settings screen. If the pattern is
rotated in the embroidering settings screen after
alignment, the pattern will not be properly aligned
with the thread mark or starting point.
n Touch to return to the previous screen.
o Remove the thread mark.
p Touch
q Touch
button to start embroidering.
1
2
BASIC EMBROIDERY
.
, and then press the "Start/Stop"
2
53