Monogram And Frame Designs - Brother PR1055X Operation Manual

Monogram and frame designs

Monogram designs can be created by combining two or three
letters.
a Touch .
Touch the button for the desired character style.
b
1
2
4
1
2
 The text input screen appears.
• If 4 is selected, the frame pattern list appears. When
creating a pattern by combining letters with a frame, it
does not matter which of the two, the letters or the
frame, is selected first. The embroidering order
follows the order in which the parts of the monogram
are selected. For this example, we will select the
letters first.
c Select the characters.
Touch the tabs to select different character shapes, and
then touch the key for one letter on each tab.
*
* Since the shapes of the letters are the same with this
design, there are no tabs to select.
1 Tabs
2 To change the character font, touch
the design selection screen.
38
3
3
1
d
2
1
2
1
e
2
f
to return to
 The selected characters appear in the text preview
area and the pattern display area.
1
1 Text preview area
2 Pattern display area
3 If the wrong character was selected or you wish to select
a different character, touch
character selected, and then touch the desired
character.
4 Line feed key
Memo
• Depending on the design, there is a preset number
of letters; however, more than the preset number of
letters can be entered. If too many letters are
selected, touch to delete the letters.
• If desired, multiple letters can be selected to use
these characters in the same way as any other
character pattern without creating a monogram.
If necessary, edit the characters. (page 40)
2
3
1 Select to edit all characters or one character.
2 Change the size of the characters.
3 Change the text arrangement.
4 Change the spacing of the character patterns.
5 Change the text alignment.
Touch .
 The pattern editing screen appears.
Next, we will combine the letters with a frame.
Touch .
 The pattern type selection screen appears.
2
3
4
to delete the last
1
4
5