Brother PR1055X Operation Manual page 138

b Select section to be embroidered, then touch
.
• Select the sections in alphabetical order.
c If necessary, edit the pattern. Then, touch
• For details, refer to "EDITING THE EMBROIDERY
PATTERN" on page 44.
Confirm the pattern size, and then select the
d
appropriate fabric and the embroidery frame.
• Be sure to select fabric of the size of combined
pattern.
e Hoop the appropriate part of the fabric. In this case,
hoop upper-left part of the fabric.
136
f
.
g
h
1 Center of fabric
Touch .
Memo
• The pattern can be rotated to either the left or right
when is touched.
Touch , and then press the "Start/Stop"
button to embroider the pattern section.
Note
• The last step of the stitching of the pattern section
will be an alignment stitching. Use this stitching for
placement of adjacent pattern section.
When embroidering is finished, the message to confirm
to embroider the next part appears. Touch
 A screen appears so that a section of the large-size
embroidery pattern can be selected.
.