Setting Up The Wireless Network Connection - Brother PR1055X Operation Manual

■ Requirements for a wireless network
connection
The wireless network connection complies with IEEE
802.11 n/g/b standards and uses the 2.4 GHz frequency.
Memo
• A wireless network cannot be set up with WPA/
WPA2 Enterprise.

Setting up the wireless network connection

There are multiple ways to set up the wireless network
connection. We recommend the method that uses the wizard
on this machine.
■ Using the wizard to set up the wireless
network connection
a In order to connect your machine to a wireless
network, the security information (SSID and network
key) for your network will be required. The network
key may also be called a password, security key or
encryption key. Find your security information and
note it in the table below.
SSID Network Key (Password)
Memo
• The wireless network connection cannot be set up
if you do not have the security information.
• How to find the security information
1 Check the manual provided with your network.
2 The default SSID may be the manufacturer's
name or the model name.
3 If you cannot find the security information,
contact the manufacturer of the router, your
network administrator or your Internet provider.
b Touch beside [Wireless LAN Setup Wizard].
 A list of available SSIDs appears.
30
c Touch beside the SSID that was noted.
 The screen for entering the network key (password)
appears.
Memo
• If the SSID that was noted does not appear in the
list, touch .
• If the SSID that was noted is not displayed, specify
it as described below.
1 Select
in the list of SSIDs.
2 Enter the desired network SSID, and then touch
.
3 Select the authentication method and
encryption mode.
• If the machine had already been connected to the
home network, touch
saved SSID.
d Enter the network key (password) that was noted, and
then touch .
, and then select the