Brother PR1055X Operation Manual page 157

Candlewicking Stitch
[Size] Increases/reduces the size of the stitch.
Specifies the spacing of the candlewicking
[Spacing]
stitch.
Chain stitch
[Size] Increases/reduces the size of the stitch.
Sets repeated embroidering at the same
part.
[Thickness]
E stitch
[Stitch
Increases/reduces the size of the stitch.
Width]
Specifies the spacing of the E stitch.
[Spacing]
Sets repeated embroidering at the same
part.
[Thickness]
Specifies the decorative line showing up to
[Flip]
the inside or to the outside.
V stitch
[Stitch
Increases/reduces the size of the stitch.
Width]
Specifies the spacing of the V stitch.
[Spacing]
Sets repeated embroidering at the same
part.
[Thickness]
Specifies the decorative line showing up to
[Flip]
the inside or to the outside.
Motif stitch
Increases/reduces the size of the stitch.
[Size]
Specifies the spacing of the motif stitch.
[Spacing]
Specifies the decorative line showing up to
[Flip]
the inside or to the outside.
■ Region Settings
2
1 Shows the stitch type and color for the selected region.
2 Shows/Changes the stitch settings for the selected
region.
3 Choices for stitch type and color of selected region.
1
3
Fill stitch settings
Specifies the embroidering direction. Select
[Direction]
[Manual] to change to the desired direction of
fill stitch.
Specifies the stitch density of fill stitch.
[Density]
Specifies to correct the shrinkage of the
[Pull
pattern by slightly shortening or lengthening
compensation]
the stitching. Change the setting after you
test embroidering the pattern and can check
the shrinkage.
Select if you need or do not need the under
[Under
embroidery for the stabilized fabric.
sewing]
Stippling stitch settings
Specifies the length of a stitch of the
[Run Pitch]
stippling stitch.
Specifies the spacing between the stitches
[Spacing]
when embroidering the stippling stitch.
Specifies the offset from the pattern outline.
[Distance]
Specifies the stitch type.
[Stitch]
Decorative fill stitch settings
Increases/reduces the size of the pattern.
[Size]
Specifies the rotation angle of the pattern.
[Direction]
Select whether [ON] or [OFF]. The outline is
[Outline]
also converted to embroidery data. If [ON] is
selected, the number of thread jumps can be
reduced.
[Random shift] Randomly varies the line.
[Position
Specifies the reference point for the pattern.
Offset]
Sets repeated embroidering at the same
[Thickness]
part.
b Select the setting to be changed, and then change the
setting in the screen that appears. (In this example, the
embroidering direction will be changed.)
 The setting screen appears.
c Touch , and then use
direction.
d Touch to apply the setting.
* Change other settings in the same way.
MY DESIGN CENTER
to change the
155
4