Connecting The Ac Adapter; Winding The Bobbin - Brother PR1055X Operation Manual

Connecting the AC adapter

a Insert the plug of the power supply cord into the AC
adapter.
b Plug the cord on the AC adapter into the DC input
connector of the bobbin winder, and then insert the
plug of the power supply cord into a household
electrical outlet.
• Be sure to firmly insert the plug on the AC adapter
into the DC input connector of the bobbin winder.
CAUTION
• Be sure to use the included AC adapter and
power cord of the bobbin winder.
• Before connecting or disconnecting the AC
adapter, be sure that the unit is not operating.
• After using the bobbin winder, disconnect it
from the electrical outlet.
144

Winding the bobbin

Prepare the bobbin and the spool of bobbin thread. Use
cotton or spun polyester bobbin thread (from 74 dtex/2 to 100
dtex/2).
a Align the groove in the bobbin with the spring on the
bobbin winder shaft, and set the bobbin on the shaft.
1 Groove in the bobbin
2 Spring on the shaft
b Set the thread spool on the spool pin.
1 Thread spool
2 Spool pin
Note
• When using a small spool, remove the spool
cushion and set the spool directly onto the spool
pin. Also use the included spool cap to keep the
small spool stable.