Brother PR1055X Operation Manual page 130

■ Embroidering aligned characters
Follow the procedure described below to embroider
aligned characters in a single row when the pattern
extends beyond the embroidery frame.
Example: Aligning "DEF" to the characters "ABC"
a Select the character patterns for "ABC".
b Touch in the embroidering settings screen.
c Select .
d Touch .
 The needle bar is positioned in the lower-left corner
of the pattern. The embroidery frame moves so that
the needle is positioned correctly.
Note
• To cancel the starting point setting and return the
starting point to the center of the pattern, touch
.
• Use to select a different starting point for
embroidering.
e Touch to return to the embroidering settings
screen, and then touch
embroidering screen.

changes to
in the lower-left corner of the pattern.
128
to continue to the
while the starting point is set
f Touch , and then press the "Start/Stop"
button to begin embroidering.
g After the characters are embroidered, cut the threads,
remove the embroidery frame, and then attach the
embroidery frame again so that the remaining
characters ("DEF") can be embroidered.
1 End of the embroidering
a
As in step , select the character patterns for "DEF".
h
i In the embroidering settings screen, touch
j Touch .
 The needle bar is positioned in the lower-left corner
of the pattern. The embroidery frame moves so that
the needle is positioned correctly.
k Touch .
.